Cuadro de distribución PDCC para ascensores 5124538 de Orona

5124538 is the PDCC board, the distribution board of the car controller box on Orona ARCA III lifts, the box mounted at the car top. It is where the supply and the signal wiring of that box are distributed, and its LEDs are what a fitter reads when tracing a fault. A blown fuse here takes the car station down. Suppliers quote the same board as 5124538 or 5124538-1. Read the number and the voltage marking on your old board before ordering.

Compártelo
  1. El tipo de negocio de POTENSI es B2B, no B2C, por lo que es mejor comprar a su distribuidor local si usted es un usuario final. Nuestro negocio es sólo para mayoristas/agentes locales.
  2. Puede intentar ponerse en contacto con nuestro departamento de servicio en primer lugar si es una gran empresa local de mantenimiento de ascensores con su propio técnico, entonces consideraremos si podemos seguir juntos o no.
  3. No somos su proveedor objetivo si sólo se centra en el precio más bajo, ignorando los productos, porque POTENSI siempre pone los Productos y Servicios en primera posición.
  4. Si busca un proveedor de productos para ascensores profesional, fiable y a largo plazo, no dude en ponerse en contacto con nosotros. REGÍSTRESE para convertirse en nuestro miembro. Recibirá un gran apoyo y ventajas.
  1. Seguro de calidad
    100% Nuevo y de fabricantes originales o sus proveedores directos.
  2. Piezas disponibles multimarca
    Disponemos de más de 200.000 piezas de repuesto multimarca para cualquier marca de ascensor.
  3. Velocidad y flexibilidad
    Dentro de 3 horas de retroalimentación, 4 días tiempos de paquete para 10k productos, 5 días envían a cabo todos.
  4. Seguro posventa y seguridad
    12 meses de garantía y devolución gratuita si enviamos productos equivocados.
  5. Máximo ahorro en los gastos de envío
    ONE-STOP-SHOP ahorra tiempo y gastos de envío comprando todas las piezas a un único proveedor.

Tanto si es usted mayorista como si es una empresa de mantenimiento, encontrará en POTENSI el ONE-STOP-SHOP para todas las piezas que necesite.

En POTENSI, nuestro objetivo es ayudarle a acceder a todo tipo de clientes o ascensores de todas las marcas fácilmente con nuestros 21 años de experiencia en la industria de ascensores de China.

La misión de POTENSI es ayudarle a alcanzar el éxito y mejorar la seguridad de los edificios en todo el mundo con piezas de ascensores de la máxima calidad y un servicio excepcional.

La velocidad de entrega es nuestro punto fuerte, pero lo que nos diferencia de los demás es nuestra oferta multimarca. Comprar en POTENSI es de lo más fácil, con más de 200.000 piezas multimarca.

Nuestra tienda web está abierta 24 horas al día, 7 días a la semana. En cuanto registrado como nuestro miembro, obtendrá muchos grandes beneficios y usted es capaz de encontrar la pieza que necesita con cualquier código y obtener nuestro servicio VIP por especialista en ventas.

Para garantizar una alta calidad, POTENSI sólo suministra piezas de fabricantes de equipos originales o de sus proveedores directos. Si colabora con POTENSI, tendrá la garantía de éxito frente a sus clientes.

Descripción

Información sobre el producto

Característica Especificación
Número de modelo 5124538
También se escribe como 5124538-1, PDCC, PDCC board, car controller box distribution board, car top box distribution board
Marca Orona
Tipo de producto Distribution board (PCB)
Función Distributes the supply and the signal wiring inside the car controller box
Se utiliza en Orona ARCA III lifts
Compatibilidad Board number and supply voltage version must match the old board

Modelos relacionados y alternativos

Orona distribution boards, and the ARCA III boards that work with this one.

Orona distribution boards:

  • 5124364 — PDCC, ARCA II car roof box
  • 5124416 — PDCM, ARCA II cabinet distribution

ARCA III boards fitted with it:

  • 5124502 — ARCA III CPU board
  • 5124504 — ARCA III power supply board
  • 5124503 — NGE energy manager board

Potensi supplies the Orona elevator PDCC board 5124538, the Orona elevator distribution board and the Orona PCB board range for ARCA III cars. The models above are only a part of what we can supply. We stock and source a much wider range of related and alternative models. If your model number is not listed here, please send us the model number or a photo of the original part, and we will confirm availability and the correct match for you.


¿Por qué elegir Potensi?

  • Cobertura de mercado del 99%: Podemos suministrar cerca de 99% de repuestos para ascensores disponibles en el mercado.
  • Garantía de calidad auténtica: Suministramos componentes para ascensores originales y fiables.
  • Asistencia especializada en identificación: Envíanos el número de modelo o fotos del producto y te ayudaremos a identificar la pieza correcta.
  • Envíos internacionales: Ofrecemos un servicio de envío internacional rápido y fiable para proyectos de mantenimiento de ascensores.

Preguntas frecuentes

Q1: What does the PDCC board do?

R: It is the distribution board of the car controller box, the box mounted at the car top on ARCA III lifts. The supply and the signal wiring of that box are distributed from it, so it sits between the incoming wiring and the boards inside the box. Orona’s own ARCA III manual shows a detailed LED view of this board, which is why it is read first when a car station goes dead.

Q2: What does the -1 in 5124538-1 mean?

R: Suppliers quote the board both as 5124538 and as 5124538-1, and the two refer to the same PDCC board. The suffix is how the supply version is recorded, not a different board design. Read the full string and the voltage marking on your old board, and send a photo of the label with it.

Q3: Is it the same as the ARCA II board?

R: No. The ARCA II car roof box used a different PDCC, coded 5124364. The two are different boards for different generations and they do not swap over. If your lift is ARCA II, tell us and we will quote the earlier code instead.

Q4: Is this a controller board?

R: No, it is a distribution and extension board, not the CPU. In ARCA III the CPU is a separate board, and the supply board is separate again. That is why a fault here usually removes supply or signals from one section rather than stopping the lift completely.

Q5: What faults point to this board?

R: A car station that is completely dead, several car devices failing at the same time, or a fuse that blows again after replacement. Look at the LEDs and check the fuses and links on the board before condemning it, because a shorted device downstream blows the same fuse. If the fuse blows with the outgoing circuits disconnected, the board is the suspect.

Pregunta 6: ¿Qué debo enviar antes de realizar el pedido?

R: A photo of the old board, front and back, with the number and any voltage marking readable. A photo of the fuse ratings and the connector layout. The lift’s ARCA generation, and the quantity you need.

logotipo potensi
Respetamos su privacidad, por lo que nunca compartimos su información.