説明
製品情報
関連モデルおよび代替モデル
Orona distribution boards, and the ARCA III boards that work with this one.
Orona distribution boards:
- 5124364 — PDCC, ARCA II car roof box
- 5124416 — PDCM, ARCA II cabinet distribution
ARCA III boards fitted with it:
- 5124502 — ARCA III CPU board
- 5124504 — ARCA III power supply board
- 5124503 — NGE energy manager board
Potensi supplies the Orona elevator PDCC board 5124538, the Orona elevator distribution board and the Orona PCB board range for ARCA III cars. The models above are only a part of what we can supply. We stock and source a much wider range of related and alternative models. If your model number is not listed here, please send us the model number or a photo of the original part, and we will confirm availability and the correct match for you.
ポテンシを選ぶ理由
- 99% の市場カバレッジ: 弊社では、市場で入手可能なエレベーター用スペアパーツを約99%分供給可能です。.
- 確かな品質保証: 当社は、純正で信頼性の高いエレベーター用部品を提供しています。.
- 専門家による身元確認の支援: 型番または製品の写真をお送りいただければ、適切な部品をご案内いたします。.
- 国際配送: 当社は、エレベーターの保守プロジェクトにおいて、迅速かつ確実な国際配送をサポートしています。.
よくある質問
Q1: What does the PDCC board do?
A: It is the distribution board of the car controller box, the box mounted at the car top on ARCA III lifts. The supply and the signal wiring of that box are distributed from it, so it sits between the incoming wiring and the boards inside the box. Orona’s own ARCA III manual shows a detailed LED view of this board, which is why it is read first when a car station goes dead.
Q2: What does the -1 in 5124538-1 mean?
A: Suppliers quote the board both as 5124538 and as 5124538-1, and the two refer to the same PDCC board. The suffix is how the supply version is recorded, not a different board design. Read the full string and the voltage marking on your old board, and send a photo of the label with it.
Q3: Is it the same as the ARCA II board?
A: No. The ARCA II car roof box used a different PDCC, coded 5124364. The two are different boards for different generations and they do not swap over. If your lift is ARCA II, tell us and we will quote the earlier code instead.
Q4: Is this a controller board?
A: No, it is a distribution and extension board, not the CPU. In ARCA III the CPU is a separate board, and the supply board is separate again. That is why a fault here usually removes supply or signals from one section rather than stopping the lift completely.
Q5: What faults point to this board?
A: A car station that is completely dead, several car devices failing at the same time, or a fuse that blows again after replacement. Look at the LEDs and check the fuses and links on the board before condemning it, because a shorted device downstream blows the same fuse. If the fuse blows with the outgoing circuits disconnected, the board is the suspect.
Q6:注文する前に何を送ればよいですか?
A: A photo of the old board, front and back, with the number and any voltage marking readable. A photo of the fuse ratings and the connector layout. The lift’s ARCA generation, and the quantity you need.

