Descripción
Información sobre el producto
Modelos relacionados y alternativos
The other PDCM version, and the cabinet boards it connects.
PDCM versions:
- 5124369 — PDCM for M33 Optimizado cabinets
Tableros para armarios ARCA 2:
- 5124409 — Placa base CPU M34
- 5124336 — PB base input and output board
- 5124337 — CPU main control board
- 5124400 — PCGONG intercom and gong board
- 5124430 — EXT1 extension board
Potensi supplies the Orona elevator PDCM distribution board 5124416, the Orona elevator PCB board and the cabinet boards around it. The models above are only a part of what we can supply. We stock and source a much wider range of related and alternative models. If your model number is not listed here, please send us the model number or a photo of the original part, and we will confirm availability and the correct match for you.
¿Por qué elegir Potensi?
- Cobertura de mercado del 99%: Podemos suministrar cerca de 99% de repuestos para ascensores disponibles en el mercado.
- Garantía de calidad auténtica: Suministramos componentes para ascensores originales y fiables.
- Asistencia especializada en identificación: Envíanos el número de modelo o fotos del producto y te ayudaremos a identificar la pieza correcta.
- Envíos internacionales: Ofrecemos un servicio de envío internacional rápido y fiable para proyectos de mantenimiento de ascensores.
Preguntas frecuentes
Q1: What does the PDCM board do?
R: Orona’s own parts list describes it as the signal distribution board of the control cabinet, and that is exactly its job. It takes the cabinet signals and passes them on to the boards and the terminal blocks, so the CPU does not wire to the field directly. That is why a fault on it tends to show in more than one circuit rather than in a single function.
Q2: Are there several PDCM versions?
R: Yes. Orona lists a PDCM that serves all apparatus except the Optimizado and the normal M33, and a separate PDCM for M33 Optimizado cabinets at 5124369. The boards look similar and both are called PDCM, but they suit different cabinets. Order by the full number on the PCB, not by the code name alone.
Q3: Is 5124416 the same as 5124416-01?
R: The base number 5124416 identifies the board, and the -01 suffix is the assembly number distributors print alongside it. Both are used for this PDCM, and you will see either form on invoices and labels. Send us a photo of the label and we will confirm which one we ship.
Q4: Does it need programming when replaced?
R: No parameters are loaded into this board. It is a distribution board, and the lift settings live in the CPU and the energy manager. What matters at replacement is the connector layout and the position of every plug, because the cabinet will not run if one is misplaced. Keep the old board next to the new one while you transfer the plugs.
Q5: Which cabinet generation uses it?
R: 5124416 sits in the 51244xx range that Orona used through the ARCA II generation, next to the CPU M34 at 5124409. The ARCA 3 cabinets carry numbers in the 51245xx range and use different boards. If your cabinet is an ARCA 3, send us the old board number before ordering.
Pregunta 6: ¿Qué debo enviar antes de realizar el pedido?
R: A photo of the old board, front and back, with the number and every connector visible. Tell us the cabinet type, and whether the lift is a standard machine or an M33 Optimizado, because that is what separates the two PDCM versions. With that we confirm the number before dispatch.

