Festo Compact Cylinder ADN-80-25-I-P-A 536366

Описание

Информация о продукте

Схожие и альтернативные модели

Other versions of the same cylinder, and other makes of 80 x 25 ISO 21287.

Festo ADN variants:

• 536356 — ADN-80-25-A-P-A, male rod thread
• 536367 — ADN-80-30-I-P-A, 30 mm stroke
• 536371 — ADN-80-80-I-P-A, 80 mm stroke
• 572721 — ADN-80-25-I-PPS-A, self-adjusting cushioning

80 x 25 ISO 21287 equivalents:

• SMC CD55B80-25
• IMI Norgren RA/192080/MX/25
• Camozzi 32F2A080A025

Potensi supplies the Festo compact cylinder ADN-80-25-I-P-A 536366, the Festo pneumatic cylinder in other ADN sizes, and the ISO 21287 crossover cylinders. The models above are only a part of what we can supply. We stock and source a much wider range of related and alternative models. If your model number is not listed here, please send us the model number or a photo of the original part, and we will confirm availability and the correct match for you.

Почему стоит выбрать Potensi?

• Охват рынка 99%: Мы можем поставить на рынок запасные части для лифтов объемом почти 99%.
• Надежное обеспечение качества: Мы поставляем оригинальные и надежные комплектующие для лифтов.
• Поддержка экспертной идентификации: Пришлите нам номер модели или фотографии товара, и мы поможем вам определить нужную запчасть.
• Международная доставка: Мы обеспечиваем быструю и надежную международную доставку для проектов по техническому обслуживанию лифтов.

Часто задаваемые вопросы

Q1: What does the code ADN-80-25-I-P-A tell me?

A: Read it as series, bore, stroke, rod end, cushioning and sensing. ADN is the compact cylinder series to ISO 21287, 80 is the 80 mm piston diameter and 25 is the 25 mm stroke. The I marks the internal piston rod thread, the P the elastic cushioning rings at both ends, and the final A the version that takes proximity sensors, which Festo confirms in the datasheet.

Q2: How much force does it give?

A: Festo rates 3016 N advancing and 2827 N retracting at 6 bar, theoretical figures at the piston. The working range is 0.6 to 10 bar, so at 4 bar you get roughly two thirds of that, and the barrel is rated for the full 10 bar. Size the load from the pressure you actually run, not from the maximum.

Q3: What thread, ports and mounting does it have?

A: The piston rod ends in an M12 female thread, so a rod clevis or a rod eye screws straight in. The air ports are G1/8, and the body mounts on through-holes, on internal threads, or with Festo mounting accessories, in any position. Moving mass is 347 g and the complete cylinder weighs about 1.19 kg.

Q4: What is the difference between I-P-A and A-P-A?

A: The letter before the P is the rod end. I is the internal thread, M12 on this bore, and A is the male thread, which Festo makes M16x1.5 on the 80 mm bore. Both are 80 mm bore, 25 mm stroke, double-acting cylinders with elastic cushioning, and both take proximity sensors. Order by the full code, because the thread decides which rod accessory fits.

Q5: Can I use an SMC or Norgren cylinder of the same size?

A: Mechanically the 80 x 25 ISO 21287 cylinders share the mounting and the bore and stroke, which is why the crossover numbers are listed above. They are not identical: the rod thread, the cushioning type, the port size and the sensing groove can differ between makes. If you are replacing one brand with another, send us the old part and we confirm the thread and the ports before you order.

Q6: How do I check it fits my installation?

A: Read the label on the old cylinder: the full code gives bore, stroke, rod end and cushioning in one line, and the five-digit number confirms it. Measure the stroke if the label is gone, and check the rod thread with a thread gauge or a known nut. Send us a photo of the label and the mounting and we will confirm the match.