Descrição
Informações sobre o produto
Modelos relacionados e alternativos
Other IOC main board versions, and the TKE boards that are replaced with it.
IOC main board versions:
- IOC-2B — earlier main board
- IOC-3B Ver 2.1 — earlier version
- IOC-3B Ver 2.2C G02 — earlier version
- IOC-3B Ver 3.1D — later version
Other TKE boards replaced with it:
- CMBK — circuit board
- MC2 — main board
Potensi supplies the TKE elevator main board IOC-3B Ver 3.1C, the TKE elevator main control board and the TKE PCB board range that goes with it. The models above are only a part of what we can supply. We stock and source a much wider range of related and alternative models. If your model number is not listed here, please send us the model number or a photo of the original part, and we will confirm availability and the correct match for you.
Porquê escolher a Potensi?
- Cobertura de mercado do 99%: Podemos fornecer cerca de 99% de peças sobressalentes para elevadores disponíveis no mercado.
- Garantia de Qualidade Autêntica: Fornecemos componentes para elevadores originais e fiáveis.
- Apoio à identificação por peritos: Envie-nos o número do modelo ou fotografias do produto e poderemos ajudá-lo a identificar a peça correta.
- Envio internacional: Oferecemos um serviço de entrega internacional rápido e fiável para projetos de manutenção de elevadores.
Perguntas frequentes
Q1: What is the IOC-3B board?
R: It is the main control board of the controller on TKE lifts built in Korea, mounted inside the control cabinet. It is the board that runs the lift’s control logic, so everything else in the cabinet depends on it. When it fails, the car usually stops and the controller either shows fault codes or goes quiet.
Q2: Does the version number matter?
R: Yes, and it matters more than the base code. Ver 2.1, 2.2C, 3.0, 3.1C and 3.1D are all in circulation on the same board design. Fitting a different version can leave the lift running with functions that do not behave as the site expects. Read the version printed on your old board and order that one.
Q3: What is B666K001-3001?
R: It is the part code suppliers quote alongside the IOC-3B name for this board. The two appear together in listings, so either can be the number a buyer searches for. Send us both the code and the version from your old board, and we confirm the match.
Q4: Is it a replacement for the IOC-2B?
R: No. IOC-2B is the earlier main board of the same family and is quoted as a separate item. The two are not the same board, and the lift’s own marking decides which one it takes. If the old board reads IOC-2B, tell us and we quote that instead.
Q5: Does the board need programming after fitting?
R: The board carries the lift’s control software and settings, so this is not a part to fit blind. Tell us the version and any parameter record you hold for the site before ordering. We confirm what state the board is supplied in rather than promising that it runs as it arrives.
P6: O que devo enviar antes de fazer a encomenda?
R: A photo of the old board, front and back, with the version and part code readable. A photo of the cabinet label showing the controller type and the lift’s data. The quantity you need, and whether you also need the CMBK board that is often changed with it.

