KM87147G01 is the Kone elevator door motor rated 200 V DC, 1 A and 200 W at 7600 rpm, with a tachogenerator built onto the motor. Kone lists it for the ADF and ADX 1-2 doors, so it is the drive motor and not the control unit. The Kone door motor is supplied as the motor only, and the tacho leads have to go back in the same order. Please confirm the operator type and send a photo of the old motor before ordering.
卸売業者であろうと、メンテナンス会社であろうと、POTENSIが必要なすべての部品のためのONE-STOP-SHOPであることがお分かりいただけるでしょう。
POTENSIでは、私たちの焦点は、中国のエレベーター業界で21年の経験を持つ、簡単にすべてのブランドのエレベーターやクライアントのすべての種類へのアクセスを支援することです。
POTENSIの使命は、最高品質のエレベーター部品と卓越したサービスにより、お客様の成功を支援し、世界中の建物の安全性を高めることです。
納品スピードはポテンシの強みですが、他社との違いはマルチブランドの提供です。POTENSIからの購入は、200K以上のマルチブランドパーツでとても簡単です。
ウェブショップは24時間年中無休で営業しております。一度 登録済み 会員になると、様々な特典が受けられ、必要なパーツをコードで検索でき、セールススペシャリストによるVIPサービスを受けることができます。
高品質を保証するために、POTENSIは、元の機器メーカーまたはその直接サプライヤーによってのみ部品を提供します。POTENSIと協力することで、顧客と対峙する際に成功の保険を得ることができます。
Other Kone door motors:
ADF and ADX operator parts:
Potensi supplies the Kone elevator door motor KM87147G01, the Kone ADF and ADX door operator motor and other Kone door parts. The models above are only a part of what we can supply. We stock and source a much wider range of related and alternative models. If your model number is not listed here, please send us the model number or a photo of the original part, and we will confirm availability and the correct match for you.
Q1: Which Kone doors does this motor drive?
A: Kone lists KM87147G01 for the ADF door and for the ADX 1 and ADX 2 doors. Its ratings are 200 V DC, 1 A, 200 W and 7600 rpm. It is the motor of the door operator, so it drives the panels; it is not the board that controls them.
Q2: Does the motor come with the tachogenerator?
A: Yes, the tacho is built onto the motor, and Kone describes the part as a motor with tacho for the ADF and ADX operators. The tacho tells the operator how fast the door is moving, so its leads have to be reconnected in the same order as on the old motor. If the two tacho wires are swapped, the door will run away or hunt instead of following the speed curve.
Q3: Is KM88998G01 the same thing?
A: No, KM88998G01 is the ADX/ADF drive control unit, the board that powers and controls the motor. This page is for the motor only, and a complete door repair often needs both. Please describe the fault: a door that does not move at all and a door that moves at the wrong speed do not point to the same part.
Q4: Will an AMD door motor fit instead?
A: No, the AMD motors are a different range with different mountings and gearboxes. Typical AMD references are KM601370G03 for left opening and KM601370G04 for right opening, with KM602748G03 for the AMD 1.5 / MIDI operator. Compare the nameplate and the shaft end of your old motor with the photo before ordering.
Q5: What should be checked before fitting a new motor?
A: Check that the door runs freely by hand and that the belt or rope is not seized, because a stiff door overloads a new motor. Check the supply from the door control unit, and check that the tacho wiring is intact along the travelling cable. Please send a photo of the old motor and its label, and the operator type, so we confirm the correct version.
Q6: Do you supply other Kone door parts?
A: Yes, we supply the ADF and ADX door motors, the drive control unit and other Kone door operator parts. The Kone range is large, so the fastest way is to send the KM number or a photo of the label. We confirm availability and the correct match before shipping.
初回注文時に10%を割引。
プロモーション商品の最新情報をお届けします。
年中無休のセールススペシャリストによるVIPサービスをご利用ください。
クレジット決済をご利用いただけます。
