Elevator Display Board FAA26800CB1 for Otis

FAA26800CB1 is the all-in-one car display panel fitted in Otis elevator car operating panels, the unit passengers read for floor position and travel direction. It is supplied as the 7 inch (178 mm) display assembly and is listed by distributors under the UPI-CPI designation. Same-size panels still differ in connector, fixing and cut-out, so the old unit’s label decides the fit. Send a photo of it and we confirm before dispatch.

Compártelo
  1. El tipo de negocio de POTENSI es B2B, no B2C, por lo que es mejor comprar a su distribuidor local si usted es un usuario final. Nuestro negocio es sólo para mayoristas/agentes locales.
  2. Puede intentar ponerse en contacto con nuestro departamento de servicio en primer lugar si es una gran empresa local de mantenimiento de ascensores con su propio técnico, entonces consideraremos si podemos seguir juntos o no.
  3. No somos su proveedor objetivo si sólo se centra en el precio más bajo, ignorando los productos, porque POTENSI siempre pone los Productos y Servicios en primera posición.
  4. Si busca un proveedor de productos para ascensores profesional, fiable y a largo plazo, no dude en ponerse en contacto con nosotros. REGÍSTRESE para convertirse en nuestro miembro. Recibirá un gran apoyo y ventajas.
  1. Seguro de calidad
    100% Nuevo y de fabricantes originales o sus proveedores directos.
  2. Piezas disponibles multimarca
    Disponemos de más de 200.000 piezas de repuesto multimarca para cualquier marca de ascensor.
  3. Velocidad y flexibilidad
    Dentro de 3 horas de retroalimentación, 4 días tiempos de paquete para 10k productos, 5 días envían a cabo todos.
  4. Seguro posventa y seguridad
    12 meses de garantía y devolución gratuita si enviamos productos equivocados.
  5. Máximo ahorro en los gastos de envío
    ONE-STOP-SHOP ahorra tiempo y gastos de envío comprando todas las piezas a un único proveedor.

Tanto si es usted mayorista como si es una empresa de mantenimiento, encontrará en POTENSI el ONE-STOP-SHOP para todas las piezas que necesite.

En POTENSI, nuestro objetivo es ayudarle a acceder a todo tipo de clientes o ascensores de todas las marcas fácilmente con nuestros 21 años de experiencia en la industria de ascensores de China.

La misión de POTENSI es ayudarle a alcanzar el éxito y mejorar la seguridad de los edificios en todo el mundo con piezas de ascensores de la máxima calidad y un servicio excepcional.

La velocidad de entrega es nuestro punto fuerte, pero lo que nos diferencia de los demás es nuestra oferta multimarca. Comprar en POTENSI es de lo más fácil, con más de 200.000 piezas multimarca.

Nuestra tienda web está abierta 24 horas al día, 7 días a la semana. En cuanto registrado como nuestro miembro, obtendrá muchos grandes beneficios y usted es capaz de encontrar la pieza que necesita con cualquier código y obtener nuestro servicio VIP por especialista en ventas.

Para garantizar una alta calidad, POTENSI sólo suministra piezas de fabricantes de equipos originales o de sus proveedores directos. Si colabora con POTENSI, tendrá la garantía de éxito frente a sus clientes.

Descripción

Información sobre el producto

Característica Especificación
Número de modelo FAA26800CB1
También se escribe como FAA 26800 CB1, UPI-CPI display panel, car indicator, car display board, 7 inch Otis display
Marca Otis
Tipo de producto Car display board / all-in-one display panel (COP indicator)
Función Shows floor position and travel direction inside the car
Se utiliza en Otis elevator car operating panels (COP)
Compatibilidad 7 inch (178 mm) unit; label, connector and panel cut-out must match

Modelos relacionados y alternativos

Other Otis display boards, and the car station boards that sit behind the panel.

Otis display boards:

  • FAA25100AA2 / FAA25100K1 — LCD car display
  • FAA23600AB1 — arrival clock display
  • DAA26800AS1 — LCD display board
  • DBA26800CR1 / CR3 — landing call LCD display

Otis car station boards:

  • DAA26800CB1 / CB2 / CA1 — communication board
  • DBA26800J1 — communication address board

Potensi supplies the Otis elevator display board FAA26800CB1, the Otis elevator car display panel and the Otis display PCB board range behind it. The models above are only a part of what we can supply. We stock and source a much wider range of related and alternative models. If your model number is not listed here, please send us the model number or a photo of the original part, and we will confirm availability and the correct match for you.


¿Por qué elegir Potensi?

  • Cobertura de mercado del 99%: Podemos suministrar cerca de 99% de repuestos para ascensores disponibles en el mercado.
  • Garantía de calidad auténtica: Suministramos componentes para ascensores originales y fiables.
  • Asistencia especializada en identificación: Envíanos el número de modelo o fotos del producto y te ayudaremos a identificar la pieza correcta.
  • Envíos internacionales: Ofrecemos un servicio de envío internacional rápido y fiable para proyectos de mantenimiento de ascensores.

Preguntas frecuentes

Q1: What is the FAA26800CB1?

R: It is the all-in-one car display panel of an Otis car operating panel, the unit that shows floor position and travel direction to passengers. It is the complete display assembly, not a single small indicator. It sits behind the COP faceplate, so the passenger only sees the screen.

Q2: Is it a bare PCB or a complete panel?

R: It is supplied as the display assembly, with the screen and its board together. The same number family also contains separate boards, so the two are not the same item when you are ordering. Send us a photo of what you are removing and we will tell you which one you need.

Q3: What is the size, and does it matter?

R: This unit is the 7 inch (178 mm) version. The size must match the opening in your COP faceplate, and a smaller or larger unit will not sit in the same cut-out. Measure the visible screen area and the fixing centres on your panel before ordering.

Q4: Which Otis systems use this panel?

R: The public listings for this number do not name the systems it was built for, so we will not guess at them. What identifies it is the label on the unit, the size, and the connector at the back. Photos of all three are enough for us to match it to your lift.

Q5: The display is blank or flickering. Is the panel finished?

R: Check the supply to the panel and the ribbon or plug at the back first, since a loose connector gives the same symptom. Look for a dim backlight, a few missing segments or a screen that comes back when the COP is tapped, which point at the panel itself. If the supply is good and the screen stays dark, replace the unit rather than the whole COP.

Q6: What should I send before ordering?

R: A photo of the front and back of the old panel, with the label readable. A photo of the connector and the fixing points. The cut-out size of your COP faceplate, and the quantity you need.

logotipo potensi
Respetamos su privacidad, por lo que nunca compartimos su información.