FAA26800CB1 is the all-in-one car display panel fitted in Otis elevator car operating panels, the unit passengers read for floor position and travel direction. It is supplied as the 7 inch (178 mm) display assembly and is listed by distributors under the UPI-CPI designation. Same-size panels still differ in connector, fixing and cut-out, so the old unit’s label decides the fit. Send a photo of it and we confirm before dispatch.
Whether you are a wholesaler or even maintenance company, you will find POTENSI is the ONE-STOP-SHOP for all the parts you need.
At POTENSI, our focus is to help you access to all kind of clients or all brand elevator easily with our 21 years experience in China elevator industry.
POTENSI mission is to help you to succeed and enhance building safety worldwide with top-quality elevator parts and outstanding service.
Delivery speed is our strength, but what make us different from everyone else is our multi-brand offering. Purchasing from POTENSI is as easy as it gets with 200K+ multi-brand parts.
Our web shop is open 24hours, 7days a week. Once you registered as our member, you will get many great benefits and you are able to find the part you need with any code and get our VIP service by sales specialist.
To ensure high quality, POTENSI provide parts only by original equipment manufacturers or their direct suppliers. You cooperate with POTENSI , you get the insurance of succeed when you are facing your customers.
Other Otis display boards, and the car station boards that sit behind the panel.
Otis display boards:
Otis car station boards:
Potensi supplies the Otis elevator display board FAA26800CB1, the Otis elevator car display panel and the Otis display PCB board range behind it. The models above are only a part of what we can supply. We stock and source a much wider range of related and alternative models. If your model number is not listed here, please send us the model number or a photo of the original part, and we will confirm availability and the correct match for you.
Q1: What is the FAA26800CB1?
A: It is the all-in-one car display panel of an Otis car operating panel, the unit that shows floor position and travel direction to passengers. It is the complete display assembly, not a single small indicator. It sits behind the COP faceplate, so the passenger only sees the screen.
Q2: Is it a bare PCB or a complete panel?
A: It is supplied as the display assembly, with the screen and its board together. The same number family also contains separate boards, so the two are not the same item when you are ordering. Send us a photo of what you are removing and we will tell you which one you need.
Q3: What is the size, and does it matter?
A: This unit is the 7 inch (178 mm) version. The size must match the opening in your COP faceplate, and a smaller or larger unit will not sit in the same cut-out. Measure the visible screen area and the fixing centres on your panel before ordering.
Q4: Which Otis systems use this panel?
A: The public listings for this number do not name the systems it was built for, so we will not guess at them. What identifies it is the label on the unit, the size, and the connector at the back. Photos of all three are enough for us to match it to your lift.
Q5: The display is blank or flickering. Is the panel finished?
A: Check the supply to the panel and the ribbon or plug at the back first, since a loose connector gives the same symptom. Look for a dim backlight, a few missing segments or a screen that comes back when the COP is tapped, which point at the panel itself. If the supply is good and the screen stays dark, replace the unit rather than the whole COP.
Q6: What should I send before ordering?
A: A photo of the front and back of the old panel, with the label readable. A photo of the connector and the fixing points. The cut-out size of your COP faceplate, and the quantity you need.
① Get 10% off on your first order.
② Get latest news about our promotion products.
③ Get our sales specialist VIP service 24/7.
④ Get access to our credit payment time.
