This is the landing operating panel board of the TKE UCP+ / CMC4+ controller, the decentralized floor board in the hall call panel. It integrates the landing buttons and direction arrows, registers the call and reports it to the controller over the floor bus; one board per landing. The label carries the board version UCP-BPP V1.14, the drawing 2666.37 and a MOD variant; the MOD code must match the board you replace.
Whether you are a wholesaler or even maintenance company, you will find POTENSI is the ONE-STOP-SHOP for all the parts you need.
At POTENSI, our focus is to help you access to all kind of clients or all brand elevator easily with our 21 years experience in China elevator industry.
POTENSI mission is to help you to succeed and enhance building safety worldwide with top-quality elevator parts and outstanding service.
Delivery speed is our strength, but what make us different from everyone else is our multi-brand offering. Purchasing from POTENSI is as easy as it gets with 200K+ multi-brand parts.
Our web shop is open 24hours, 7days a week. Once you registered as our member, you will get many great benefits and you are able to find the part you need with any code and get our VIP service by sales specialist.
To ensure high quality, POTENSI provide parts only by original equipment manufacturers or their direct suppliers. You cooperate with POTENSI , you get the insurance of succeed when you are facing your customers.
Other BPP landing board drawings:
Boards of the same cabinet:
Potensi supplies the TKE elevator landing board UCP-BPP 2666.37, the TKE LOP board and the other TKE PCB boards of the CMC4+ cabinet. The models above are only a part of what we can supply. We stock and source a much wider range of related and alternative models. If your model number is not listed here, please send us the model number or a photo of the original part, and we will confirm availability and the correct match for you.
Q1: What does this landing board do?
A: It is the landing operating panel board, the board that sits behind the hall buttons on each floor. TKE builds this part of the system in a decentralized way: the board integrates the push buttons and the direction arrows itself and carries its own microprocessor. It registers the call on that floor and reports it to the controller over the floor bus, so one board serves one landing rather than one board serving the whole building.
Q2: Is this the cabin board or a landing board?
A: It is a landing board, mounted in the hall call panel on the floor. The car side uses a different board, the UCC2, with a different connector set and a different function. Mixing the two is a common ordering mistake, so check the mounting position before you compare numbers.
Q3: What do the numbers on the label mean?
A: The label carries four separate pieces of information, and all four matter. UCP-BPP is the board designation and V1.14 is its version; 2666.37 is the drawing number; MOD (111121) is the variant code; UCP+ CMC4+ names the controller family the board belongs to. Quote them all when you ask for a price, because the same board designation exists in several versions.
Q4: Can I fit a board with a different MOD code?
A: Not safely in every installation. The same drawing appears with different MOD codes, and neighbouring drawings carry other variants: 2666.37 is also seen as MOD (222232), and 2666.34 is offered as the BPP+ board for CMC4+. Different MOD versions are not interchangeable in all systems, so match the code printed on the board you take out rather than the drawing number alone.
Q5: How many boards do we need for one lift?
A: One per landing, because each floor panel carries its own board. Count the floors served, then note whether each panel has both up and down arrows or a single button, as the two configurations use different panels. For a group of lifts, each lift has its own set of landing panels.
Q6: What do you need from me before dispatch?
A: A clear photo of the label showing the designation, the MOD code and the order number, plus a photo of the connectors on the back. Tell us the floor count and the controller type on the cabinet nameplate. The board is supplied on its own; the button inserts, the panel plate and the ribbon cables are separate items.
① Get 10% off on your first order.
② Get latest news about our promotion products.
③ Get our sales specialist VIP service 24/7.
④ Get access to our credit payment time.
