This is the landing operating panel board of the TKE UCP+ / CMC4+ controller, the decentralized floor board in the hall call panel. It integrates the landing buttons and direction arrows, registers the call and reports it to the controller over the floor bus; one board per landing. The label carries the board version UCP-BPP V1.14, the drawing 2666.37 and a MOD variant; the MOD code must match the board you replace.
卸売業者であろうと、メンテナンス会社であろうと、POTENSIが必要なすべての部品のためのONE-STOP-SHOPであることがお分かりいただけるでしょう。
POTENSIでは、私たちの焦点は、中国のエレベーター業界で21年の経験を持つ、簡単にすべてのブランドのエレベーターやクライアントのすべての種類へのアクセスを支援することです。
POTENSIの使命は、最高品質のエレベーター部品と卓越したサービスにより、お客様の成功を支援し、世界中の建物の安全性を高めることです。
納品スピードはポテンシの強みですが、他社との違いはマルチブランドの提供です。POTENSIからの購入は、200K以上のマルチブランドパーツでとても簡単です。
ウェブショップは24時間年中無休で営業しております。一度 登録済み 会員になると、様々な特典が受けられ、必要なパーツをコードで検索でき、セールススペシャリストによるVIPサービスを受けることができます。
高品質を保証するために、POTENSIは、元の機器メーカーまたはその直接サプライヤーによってのみ部品を提供します。POTENSIと協力することで、顧客と対峙する際に成功の保険を得ることができます。
Other BPP landing board drawings:
Boards of the same cabinet:
Potensi supplies the TKE elevator landing board UCP-BPP 2666.37, the TKE LOP board and the other TKE PCB boards of the CMC4+ cabinet. The models above are only a part of what we can supply. We stock and source a much wider range of related and alternative models. If your model number is not listed here, please send us the model number or a photo of the original part, and we will confirm availability and the correct match for you.
Q1: What does this landing board do?
A: It is the landing operating panel board, the board that sits behind the hall buttons on each floor. TKE builds this part of the system in a decentralized way: the board integrates the push buttons and the direction arrows itself and carries its own microprocessor. It registers the call on that floor and reports it to the controller over the floor bus, so one board serves one landing rather than one board serving the whole building.
Q2: Is this the cabin board or a landing board?
A: It is a landing board, mounted in the hall call panel on the floor. The car side uses a different board, the UCC2, with a different connector set and a different function. Mixing the two is a common ordering mistake, so check the mounting position before you compare numbers.
Q3: What do the numbers on the label mean?
A: The label carries four separate pieces of information, and all four matter. UCP-BPP is the board designation and V1.14 is its version; 2666.37 is the drawing number; MOD (111121) is the variant code; UCP+ CMC4+ names the controller family the board belongs to. Quote them all when you ask for a price, because the same board designation exists in several versions.
Q4: Can I fit a board with a different MOD code?
A: Not safely in every installation. The same drawing appears with different MOD codes, and neighbouring drawings carry other variants: 2666.37 is also seen as MOD (222232), and 2666.34 is offered as the BPP+ board for CMC4+. Different MOD versions are not interchangeable in all systems, so match the code printed on the board you take out rather than the drawing number alone.
Q5: How many boards do we need for one lift?
A: One per landing, because each floor panel carries its own board. Count the floors served, then note whether each panel has both up and down arrows or a single button, as the two configurations use different panels. For a group of lifts, each lift has its own set of landing panels.
Q6: What do you need from me before dispatch?
A: A clear photo of the label showing the designation, the MOD code and the order number, plus a photo of the connectors on the back. Tell us the floor count and the controller type on the cabinet nameplate. The board is supplied on its own; the button inserts, the panel plate and the ribbon cables are separate items.
初回注文時に10%を割引。
プロモーション商品の最新情報をお届けします。
年中無休のセールススペシャリストによるVIPサービスをご利用ください。
クレジット決済をご利用いただけます。
