الوصف
معلومات عن المنتج
النماذج ذات الصلة والبديلة
Other ratings in the MPS series, and the Emparro unit that distributors list as its successor.
MPS series, other ratings:
- MPS10-230/24 — 10 A version, art. 85055
- MPS10-110/24 — 10 A, for 110 V AC supplies
Successor and mounting accessory:
- 85440 — Emparro 5-100-240/24, 24-28 V DC 5 A
- 89500 — screw-mounting plate for DIN-rail units
Potensi supplies the Murrelektronik power supply MPS5-230/24 and the Murrelektronik 24 V DC power supply range used in lift control cabinets. The models above are only a part of what we can supply. We stock and source a much wider range of related and alternative models. If your model number is not listed here, please send us the model number or a photo of the original part, and we will confirm availability and the correct match for you.
لماذا تختار بوتنسي؟
- تغطية سوق 99%: يمكننا توفير ما يقارب 99% من قطع غيار المصاعد المتوفرة في السوق.
- ضمان الجودة الأصلي: نحن نوفر قطع غيار مصاعد أصلية وموثوقة.
- الدعم في تحديد الهوية من قبل الخبراء: أرسل إلينا رقم الطراز أو صور المنتج، وسنساعدك في تحديد القطعة المناسبة.
- الشحن الدولي: نحن نقدم خدمة توصيل دولية سريعة وموثوقة لمشاريع صيانة المصاعد.
الأسئلة الشائعة
Q1: What does this unit do in a lift cabinet?
ج: It converts the mains supply into the 24 V DC rail that the control boards, relays and door operator run on. Output is 24 V DC at 5 A, 120 W, delivered as SELV, with short-circuit and overload protection built in. It is a power supply, not a controller: it carries no lift parameters and holds no software.
Q2: Is it 5 A or 6 A?
ج: Both figures come from the same data sheet, at different temperatures: 6 A up to 40 °C and 5 A up to 60 °C. Plan the load on the 5 A figure unless the cabinet stays genuinely cool. Loads close to the limit on a warm shaft can trip the unit even though nothing is faulty.
Q3: Can I put two in parallel for more current?
ج: No. The data sheet allows serial connection but expressly rules out parallel operation. Two units on one rail will not share the load evenly and one will carry the work. If you need more current, go to the 10 A version rather than adding a second 5 A unit.
Q4: Is 85053 still obtainable, and what replaces it?
ج: Distributor records list it as replaced by 85440, the Emparro 5-100-240/24, which gives 24-28 V DC at 5 A. The two are not identical: the Emparro output is adjustable and the housing is a different width, so check the mounting space. Tell us which of the two your cabinet takes and we will quote that one.
Q5: Does it only work on 230 V?
ج: No. The input range is 90-265 V AC at 50/60 Hz, so 110 V, 120 V, 230 V and 240 V supplies all fall inside it. Input current is 1.9 A at 115 V and 0.95 A at 230 V, and the unit bridges mains dips of about 10 ms at 115 V and 80 ms at 230 V. That wide range is why one article number appears in cabinets built for different markets.
Q6: What should I send with the order?
ج: A photo of the old unit with the label readable, showing the article number and the output rating. The mains voltage at the site, and the load in amps that the 24 V rail actually carries. Whether the cabinet has room for a wider housing, in case the successor is the one offered.

