Descrição
Informações sobre o produto
Modelos relacionados e alternativos
Other Elicom II parts, and the Kone intercom units that cover other duties.
Elicom II system parts:
- KM921672 — intercom desk, 8 lines, 3 m cable
- KM896546G02 — cabin speaking unit Elicom II
- KM885609G01 — intercom system cable, 5 m
Other Kone intercom units:
- KM50070551 — emergency handset unit
- KM896383 — intercom, COP TJ-2Y
Potensi supplies the Kone elevator intercom control unit KM921673, the Kone Elicom II intercom panel and the Kone communication board range around it. The models above are only a part of what we can supply. We stock and source a much wider range of related and alternative models. If your model number is not listed here, please send us the model number or a photo of the original part, and we will confirm availability and the correct match for you.
Porquê escolher a Potensi?
- Cobertura de mercado do 99%: Podemos fornecer cerca de 99% de peças sobressalentes para elevadores disponíveis no mercado.
- Garantia de Qualidade Autêntica: Fornecemos componentes para elevadores originais e fiáveis.
- Apoio à identificação por peritos: Envie-nos o número do modelo ou fotografias do produto e poderemos ajudá-lo a identificar a peça correta.
- Envio internacional: Oferecemos um serviço de entrega internacional rápido e fiável para projetos de manutenção de elevadores.
Perguntas frequentes
Q1: What does the KM921673 unit do?
R: It is the central intercom unit of the Elicom II system, the part that gathers the car intercom lines at one point. Kone records it under the E-Link monitoring and command system, so it serves the alarm and communication function rather than the lift control itself. A failure here is heard, not seen: the car intercom goes quiet while the lift keeps running normally.
Q2: Is it the same as the 8-line unit?
R: No. The 4-line unit is KM921673, and the 8-line desk is a separate part, KM921672, supplied with a 3 m cable. Buyers mix the two because the names are almost identical. Count the lines you need and read the number on the old unit before ordering.
Q3: Which Kone lifts use it?
R: Kone lists it for MiniSpace, MonoSpace 700, MonoSpace Special and TranSys. That range covers both machine-room-less and machine-room installations. If your lift is outside that list, send us the controller type and we will check it with you.
Q4: What else does the system need?
R: A cabin speaking unit at each car, such as the Elicom II cabin unit, and the intercom system cable. The control unit only gathers the lines; it does not replace the units in the car. Tell us how many cars are on the site and we will quote the whole set rather than one box.
Q5: What faults point to this unit?
R: No call from the car to the machine room, one line dead while the others work, or a handset that stays silent. Check the intercom cable and the cabin unit on the affected line first, because a broken pair gives exactly the same symptom. If the line is sound at the cable and the fault follows the control unit, replace it.
P6: O que devo enviar antes de fazer a encomenda?
R: A photo of the old unit with the KM number readable, front and back. The number of cars, or lines, the site needs. The lift model from the controller or car plate, and the quantity you need.

