KM509314G01 is the external cooling fan of the Kone MR17 geared hoisting machine, the Kone elevator fan that keeps the machine motor cool. Kone lists it as FAN, EXTERNAL MR17, in its motor blower group, 3.5 kg gross. It mounts outside the machine and moves air over the motor body, so a seized or noisy fan shows up as a hot machine and thermal trips rather than as a lift fault. Match by machine type and the old fan label.
卸売業者であろうと、メンテナンス会社であろうと、POTENSIが必要なすべての部品のためのONE-STOP-SHOPであることがお分かりいただけるでしょう。
POTENSIでは、私たちの焦点は、中国のエレベーター業界で21年の経験を持つ、簡単にすべてのブランドのエレベーターやクライアントのすべての種類へのアクセスを支援することです。
POTENSIの使命は、最高品質のエレベーター部品と卓越したサービスにより、お客様の成功を支援し、世界中の建物の安全性を高めることです。
納品スピードはポテンシの強みですが、他社との違いはマルチブランドの提供です。POTENSIからの購入は、200K以上のマルチブランドパーツでとても簡単です。
ウェブショップは24時間年中無休で営業しております。一度 登録済み 会員になると、様々な特典が受けられ、必要なパーツをコードで検索でき、セールススペシャリストによるVIPサービスを受けることができます。
高品質を保証するために、POTENSIは、元の機器メーカーまたはその直接サプライヤーによってのみ部品を提供します。POTENSIと協力することで、顧客と対峙する際に成功の保険を得ることができます。
Fans for the machine, and the car fans that are often ordered with them.
Machine cooling fans:
Car and car ventilation fans:
Potensi supplies the Kone elevator fan KM509314G01, the Kone machine cooling fan for the MR17 and the car ventilation fans around it. The models above are only a part of what we can supply. We stock and source a much wider range of related and alternative models. If your model number is not listed here, please send us the model number or a photo of the original part, and we will confirm availability and the correct match for you.
Q1: What is this fan for?
A: It is the external cooling fan of the MR17 hoisting machine, mounted on the machine itself to blow air over the motor body. Kone’s own parts library names it FAN, EXTERNAL MR17, and its French entry reads external ventilator of the MR17 winch. It is not a car fan, so it is not interchangeable with the fans inside the cabin.
Q2: What does MR17 mean?
A: MR17 is Kone’s component family code, and Kone defines it as geared machinery with 175 mm centre distance between the worm and the worm wheel. That is how you tell whether this fan belongs to your machine: read the machine plate, not the lift model. If the plate shows another MR size, the fan is a different item and we will quote the matching one.
Q3: What voltage and airflow does it have?
A: Kone does not publish the electrical data on its public parts page; what it does list is the 3.5 kg gross weight and the motor blower group. The rating is printed on the fan motor label, and two fans of the same MR17 machine can be built for different site voltages. Send us a photo of that label and we will confirm the version we supply against it.
Q4: The machine gets hot and trips on overload. Is the fan the cause?
A: Check the fan before you touch the machine windings. If the blades turn freely by hand but the fan does not spin up when the machine runs, the fan motor or its supply is the fault; if the blades are stiff or noisy, the bearings are gone. With the fan running and the machine still overheating, the cause is elsewhere, usually load or brake drag.
Q5: Can I fit a car fan instead?
A: No. The car fans in the list above are built into the cabin ceiling or the car panel and are sized for air circulation, not for cooling a machine motor. The machine fan has to sit on the MR17 housing with the right mounting and the right cable route. Fit the part the machine was built with, and use the car fans only for their own job.
Q6: What should I send before ordering?
A: A photo of the old fan, showing the motor label with the voltage and the part number, plus a photo of the machine plate. Tell us the machine type and, if you have it, the lift’s contract or order number. With those we confirm the fan version and the mounting before dispatch.
初回注文時に10%を割引。
プロモーション商品の最新情報をお届けします。
年中無休のセールススペシャリストによるVIPサービスをご利用ください。
クレジット決済をご利用いただけます。
