説明
製品情報
関連モデルおよび代替モデル
Other power ratings, and the parts that go with the drive.
ADrive power ratings:
- ADrive 4B075 — 7.5 kW / 17 A, Size-B
- ADrive 4B055 — 5.5 kW / 14 A, Size-B
- ADrive 4C150 — 15 kW / 35 A, Size-C
- ADrive 4C220 — 22 kW / 50 A, Size-C
Drive accessories and options:
- ADrive data key — stores and moves parameters
- ENCABIT-Plus — encoder module for synchronous motors
- Braking resistor, EMI filter, line filter — cabinet options
Potensi supplies the Arkel ADrive 4B110 elevator VVVF inverter and the Arkel elevator inverter range around it. The models above are only a part of what we can supply. We stock and source a much wider range of related and alternative models. If your model number is not listed here, please send us the model number or a photo of the original part, and we will confirm availability and the correct match for you.
ポテンシを選ぶ理由
- 99% の市場カバレッジ: 弊社では、市場で入手可能なエレベーター用スペアパーツを約99%分供給可能です。.
- 確かな品質保証: 当社は、純正で信頼性の高いエレベーター用部品を提供しています。.
- 専門家による身元確認の支援: 型番または製品の写真をお送りいただければ、適切な部品をご案内いたします。.
- 国際配送: 当社は、エレベーターの保守プロジェクトにおいて、迅速かつ確実な国際配送をサポートしています。.
よくある質問
Q1: What are the ratings of the 4B110?
A: 400 V three-phase input from 340 to 420 V at 50/60 Hz, and a 0 to 400 V, 0 to 100 Hz output. The motor rating is 11 kW, which is 15 hp, with 26 A nominal output current and 52 A available for under six seconds. Power factor is above 0.97, the carrier frequency is 7.5 or 10 kHz, and frequency resolution is 0.004 Hz.
Q2: Which motors can it drive?
A: Asynchronous motors in open loop V/F or in closed loop, and synchronous gearless motors. For a synchronous machine the ENCABIT-Plus encoder module and an absolute encoder are needed: EnDat, SSI or SinCos. Incremental encoders from 500 to 4096 pulses per revolution, HTL or TTL, are used on the asynchronous side.
Q3: How big is it, and does it fit the old space?
A: It is a Size-B frame, about 260 mm wide, 387 mm high and 184 mm deep. The same frame carries 4B055, 4B075 and 4B110, so a like-for-like replacement occupies the same footprint. Moving from a 4C150 or larger means a Size-C housing at 289 x 442 x 205 mm, which needs more room.
Q4: What comes in the box?
A: The manual, the software disc, an RS-232 cable for a PC, the electronic data key, and the RFI filter. The braking resistor, the EMI filter and the AC line filter are options, ordered to suit the installation. The remote keypad and the ENCABIT-Plus module are also separate items, not part of the drive.
Q5: How does evacuation work on this drive?
A: The power section can run from a 60 to 120 V DC battery or from a single-phase 230 V UPS. The control circuits take an external 24 V DC supply, so the drive can be worked on and can complete an evacuation without the main supply. The data key carries the parameter set, which is why a spare key is worth keeping with the controller.
Q6:注文する前に何を送ればよいですか?
A: A photo of the drive label showing the model and the 11 kW / 26 A rating, and a photo of the terminals. The motor nameplate, whether it is geared asynchronous or gearless synchronous, and which encoder it uses. The cabinet make and the reason for replacement, because an oversized or undersized drive shows up as a heat or trip problem rather than a dead unit.

