Kleemann Elevator PCB Board LBNIO-12 LBM9

Descripción

Información sobre el producto

Modelos relacionados y alternativos

Other Kleemann LiSA boards that the LBM modules are fitted on:

• APO-14 — car connection board, carrier for 4 LBMs
• LF-12 — car panel connection board, carrier for 2 LBMs

Other boards of the same Kleemann LiSA controller:

• IO16 — I/O board for the LiSA controller
• LISA 20-20 PB — LiSA 20 processor board
• LISA 20-20 RB — LiSA 20 relay board

Potensi supplies the Kleemann elevator PCB board LBNIO-12 LBM9, the Kleemann LiSA bus board, the Kleemann circuit board, the Kleemann printed circuit board and other Kleemann lift control boards. The models above are only a part of what we can supply. We stock and source a much wider range of related and alternative models. If your model number is not listed here, please send us the model number or a photo of the original part, and we will confirm availability and the correct match for you.

¿Por qué elegir Potensi?

• Cobertura de mercado del 99%: Podemos suministrar cerca de 99% de repuestos para ascensores disponibles en el mercado.
• Garantía de calidad auténtica: Suministramos componentes para ascensores originales y fiables.
• Asistencia especializada en identificación: Envíanos el número de modelo o fotos del producto y te ayudaremos a identificar la pieza correcta.
• Envíos internacionales: Ofrecemos un servicio de envío internacional rápido y fiable para proyectos de mantenimiento de ascensores.

Preguntas frecuentes

Q1: What is the LBNIO-12 board used for?

R: It is the LiSA bus module PCB board of the Kleemann LiSA lift controller. It is used as the landing and car I/O module, and it is also known as the LBNIO and the LBM9. It is also known as the Kleemann LiSA bus board, the Kleemann landing board, the Kleemann button board, the Kleemann printed circuit board and the Kleemann circuit board.

Q2: What other names and part numbers is this board known by?

R: The board is written LBNIO-12 and is also written LBNIO, LBM9 and LBM9 negative. The trade name of the board is the LiSA Bus LBM9 negative. The LBM9 is also written LMB9 in some trade listings, and the board is also known as the Kleemann LISA BUS floor board. The current board version is LBNIO-12 V1.13.

Q3: What are the technical data of the LiSA bus module?

R: The LiSA bus module provides 8 electronic inputs and outputs of 12 V to 24 V in npn or pnp design. The module is operated at the LiSA bus, and up to 64 modules can be connected to the car bus and to the landing bus. The 8 inputs and outputs are freely programmable and short-circuit-proof, and they are short-circuit-proof but not sustained short-circuit-proof.

Q4: Which Kleemann lifts is this board used on?

R: It is supplied for Kleemann lifts that use the LiSA lift controller, including the LiSA 20 controller. The module is used both on the landing bus and on the car bus. Please confirm the controller type, the board position and the board version before ordering.

Q5: How is the LBM9 board addressed on the LiSA bus?

R: The module is addressed with the jumpers JP1 to JP32, and the address range is 0 to 63. The landing bus normally uses the addresses 0 to 63, and the car bus uses 0 to 47 for door side 2 and 48 to 60 for the modules inside the lift cabin. The module has 8 input and output status LEDs, and the operating LED shows the module state.

Q6: How can I confirm that this board matches my lift, and do you supply other Kleemann boards?

R: Please compare the board designation LBNIO-12, the version V1.13, the board layout, the connector positions and the jumper settings with the board in your lift. If you are not sure, please send clear photos of the board and of the connectors, and our technical team can help identify the correct board. We also supply other Kleemann LiSA boards, LBM modules, processor boards, relay boards and other Kleemann lift control boards and spare parts.