AAA456YA2 is the eccentric door hanger roller used on Otis landing and car doors, an 85 mm wheel 20 mm wide running on a 6203RS bearing. The offset centre lets the panel be set against the track, which is why a plain roller will not do the same job. Distributors list it for E311 and E411 installations and also quote it as AAA456YA1 or AAA456YA4. Measure the wheel and read the bearing before ordering.
Whether you are a wholesaler or even maintenance company, you will find POTENSI is the ONE-STOP-SHOP for all the parts you need.
At POTENSI, our focus is to help you access to all kind of clients or all brand elevator easily with our 21 years experience in China elevator industry.
POTENSI mission is to help you to succeed and enhance building safety worldwide with top-quality elevator parts and outstanding service.
Delivery speed is our strength, but what make us different from everyone else is our multi-brand offering. Purchasing from POTENSI is as easy as it gets with 200K+ multi-brand parts.
Our web shop is open 24hours, 7days a week. Once you registered as our member, you will get many great benefits and you are able to find the part you need with any code and get our VIP service by sales specialist.
To ensure high quality, POTENSI provide parts only by original equipment manufacturers or their direct suppliers. You cooperate with POTENSI , you get the insurance of succeed when you are facing your customers.
Other Otis door rollers, in the same 85 mm size and in other sizes.
Same 85 mm Otis door rollers:
Otis door rollers in other sizes:
Potensi supplies the Otis elevator door hanger roller AAA456YA2, the Otis elevator door roller and the Otis door hardware range that goes with it. The models above are only a part of what we can supply. We stock and source a much wider range of related and alternative models. If your model number is not listed here, please send us the model number or a photo of the original part, and we will confirm availability and the correct match for you.
Q1: Where is the AAA456YA2 roller fitted?
A: It is the hanger roller of an Otis landing or car door, the wheel that runs on the hanger track and carries the door panel. Two of them usually carry one panel, so a worn set is normally replaced together. It is a mechanical wear part, not a door operator component.
Q2: What does “eccentric” mean here?
A: The roller centre is offset from its mounting point instead of sitting on the axis. That offset is what lets the panel be brought up to the track and set level along its travel. A plain concentric roller of the same diameter will bolt on, but the door cannot be adjusted the same way.
Q3: Are AAA456YA1 and AAA456YA4 the same roller?
A: Distributors quote all three codes on the same 85 x 20 mm roller with a 6203 bearing. The suffix letters mark different versions of the same part, not different sizes. Send the code from your old roller and we confirm which one you are replacing.
Q4: Which bearing does it use?
A: The 6203RS bearing, the sealed type, as you specified. Some listings for this roller family quote a 6204 bearing; those are wider wheels with a larger bore and will not fit the same hanger. If the old wheel carries a 6202, the wheel you have is not this size, so tell us before ordering.
Q5: How do I know the roller is worn?
A: Listen for a rumble or a scraping sound as the door runs, and look for a flat spot on the tread. A worn roller also shows as the panel dragging at the start of travel, or a gap that changes along the track. Check the track and the guide gibs first, because a loose gib imitates a worn roller.
Q6: What should I send before ordering?
A: A photo of the old roller in place, so the hanger type is visible. The wheel diameter and width measured across the tread. The bearing number stamped on the seal, and the quantity you need per panel.
① Get 10% off on your first order.
② Get latest news about our promotion products.
③ Get our sales specialist VIP service 24/7.
④ Get access to our credit payment time.
