Otis Elevator LVPB Power Board GCA26800PM2

GCA26800PM2 is an LVPB, the low voltage power board of the Otis GECB-LV control system. It generates the DC rails the controller runs on: 48 V for the safety chain and drive, 48 V for the car, 30 V for the serial link and CAN group, and 12 V for the encoder and logic. It also carries the battery charge circuit, so a failure shows as a dead controller or a battery that never charges. Match the PM number on the old board before ordering.

شاركها
  1. نوع عمل POTENSI هو B2B وليس B2C، لذلك من الأفضل أن تشتري من الموزع المحلي إذا كنت مستخدمًا نهائيًا. عملنا مخصص لتجار الجملة/الوكلاء المحليين فقط.
  2. يمكنك محاولة الاتصال بقسم الصيانة لدينا أولاً إذا كنت شركة صيانة مصاعد محلية كبيرة ولديك فني خاص بك، ثم سننظر فيما إذا كان بإمكاننا الاستمرار معاً أم لا.
  3. نحن لسنا المورد المستهدف إذا كنت تركز فقط على السعر الأقل متجاهلاً المنتجات، لأن شركة POTENSI تضع المنتجات والخدمات دائماً في المرتبة الأولى.
  4. إذا كنت تبحث عن مورد لمنتجات المصاعد على المدى الطويل وموثوق ومحترف، فلا تتردد في التسجيل لتصبح عضواً لدينا. ستحصل على دعم ومزايا رائعة.
  1. تأمين الجودة
    100% جديدة ومن الشركات المصنعة الأصلية أو مورديها المباشرين.
  2. الأجزاء المتوفرة متعددة العلامات التجارية
    يتوفر أكثر من 200 ألف قطعة غيار متعددة العلامات التجارية لأي علامة تجارية للمصاعد.
  3. السرعة والمرونة
    في غضون 3 ساعات من تلقي الملاحظات، وأوقات تغليف لمدة 4 أيام لـ 10 آلاف منتج، وشحن الكل خلال 5 أيام.
  4. تأمين ما بعد البيع والسلامة
    ضمان لمدة 12 شهرًا وإرجاع مجاني إذا أرسلنا منتجات خاطئة.
  5. أقصى قدر من التوفير في تكلفة الشحن
    يوفر ONE-STOP-SHOP الوقت وتكاليف الشحن من خلال شراء جميع القطع من مصدر واحد.

سواءً كنت تاجر جملة أو حتى شركة صيانة، ستجد أن POTENSI هي المتجر الوحيد لجميع القطع التي تحتاجها.

في شركة POTENSI، ينصب تركيزنا على مساعدتك في الوصول إلى جميع أنواع العملاء أو جميع أنواع المصاعد ذات العلامات التجارية بسهولة من خلال خبرتنا التي تمتد لـ 21 عامًا في صناعة المصاعد الصينية.

تتمثل مهمة شركة POTENSI في مساعدتك على النجاح وتعزيز سلامة المباني في جميع أنحاء العالم من خلال قطع غيار المصاعد عالية الجودة والخدمة المتميزة.

سرعة التسليم هي نقطة قوتنا، ولكن ما يجعلنا مختلفين عن أي شخص آخر هو عروضنا متعددة العلامات التجارية. فالشراء من POTENSI سهل للغاية مع أكثر من 200 ألف قطعة متعددة العلامات التجارية.

متجرنا الإلكتروني مفتوح 24 ساعة، 7 أيام في الأسبوع. بمجرد أن مسجل بصفتك عضوًا لدينا، ستحصل على العديد من المزايا الرائعة وستتمكن من العثور على القطعة التي تحتاجها بأي كود والحصول على خدمة كبار الشخصيات من قبل أخصائي المبيعات.

لضمان الجودة العالية، لا توفر شركة POTENSI قطع الغيار إلا من قبل الشركات المصنعة للمعدات الأصلية أو مورديها المباشرين. عندما تتعاون مع POTENSI، فإنك تحصل على ضمان النجاح عندما تواجه عملاءك.

الوصف

معلومات عن المنتج

ميزة المواصفات
رقم الطراز GCA26800PM2
يُكتب أيضًا على النحو التالي GCA26800 PM2, 26800PM2, OTEL26800PM2, LVPB, Low Voltage Power Board
العلامة التجارية أوتيس
نوع المنتج Low voltage power board (PCB)
الوظيفة Generates the 48 V, 30 V and 12 V DC rails for the GECB-LV, with battery charging
يُستخدم في Otis GECB-LV control cabinets, including Gen2 LVA systems
التوافق PM version must match the failed board; PM1, PM3 and PM10 are other versions

النماذج ذات الصلة والبديلة

Other versions of the LVPB, and the Otis boards that work with it.

Other LVPB versions:

  • GCA26800PM1 — 230 V AC version
  • GCA26800PM3 — later version
  • GCA26800PM10 — listed with PM1
  • GAA26800PM1 / GBA26800PM1 — same board, other prefixes

Boards and assemblies around it:

  • GBA29502C10 — GECB-LV + LVPB combined print, 230 V
  • GBA26800NR — GECB-LV control board

Potensi supplies the Otis elevator LVPB power board GCA26800PM2 and the Otis GECB-LV power supply range. The models above are only a part of what we can supply. We stock and source a much wider range of related and alternative models. If your model number is not listed here, please send us the model number or a photo of the original part, and we will confirm availability and the correct match for you.


لماذا تختار بوتنسي؟

  • تغطية سوق 99%: يمكننا توفير ما يقارب 99% من قطع غيار المصاعد المتوفرة في السوق.
  • ضمان الجودة الأصلي: نحن نوفر قطع غيار مصاعد أصلية وموثوقة.
  • الدعم في تحديد الهوية من قبل الخبراء: أرسل إلينا رقم الطراز أو صور المنتج، وسنساعدك في تحديد القطعة المناسبة.
  • الشحن الدولي: نحن نقدم خدمة توصيل دولية سريعة وموثوقة لمشاريع صيانة المصاعد.

الأسئلة الشائعة

Q1: What does the LVPB supply?

ج: Otis defines it as the source of every DC rail in the GECB-LV system, and the basic data lists four outputs. 48 V for the safety chain and drive at 3.2 A, 48 V for the car at 3.7 A, 7.2 A in the higher configuration. 30 V at 1.2 A for the serial link master and CAN group, and 12 V at 1.2 A for the encoder, the 5 V and 3.3 V logic and the car CAN.

Q2: What does a failing board look like on site?

ج: A controller that does not start at all, one that restarts, or communication faults between boards that move when the cabinet warms up. Battery symptoms belong here too, because charging runs through this board: the charge symbol stays on Fault, or the battery never reaches full. Check the P-LVPB1 plug and the battery itself first, since a loose connector or a dead battery gives the same picture.

Q3: PM2, PM1, PM3 or PM10. Which one do I order?

ج: They are versions of the same LVPB board, and the version has to match what the cabinet expects. PM1 is documented by distributors as the 230 V AC version; PM3 and PM10 sit alongside it in the same spare parts lists. Read the PM number off the failed board, and send the cabinet type with it, because the number is the only reliable identifier on these boards.

Q4: Does the board come programmed?

ج: The LVPB is a power board, so it carries no lift parameters and no car configuration. What it does carry is a hardware version, and that is what has to match. We confirm the version and the supply state of every board before dispatch rather than promising that it runs as it arrives.

Q5: My board is fixed to the control board. Is it one part?

ج: Sometimes. Otis mounts the GECB-LV vertically onto the LVPB with a sheet metal clamp, and some cabinets are supplied as one combined print, such as GBA29502C10 for the 230 V version. If the two boards are clamped together with no separate part number on the lower board, quote the assembly number. Send a photo of the pair and we will tell you which level to order.

السؤال 6: ما الذي يجب أن أرسله قبل تقديم الطلب؟

ج: A clear photo of the board, front and back, with the GCA number and the PM version readable. The cabinet type or the controller label, and the battery voltage and count if the site runs on battery rescue. Whether the old board failed on its own or took other boards with it, since a shorted rail often damages more than one card.

شعار بوتينسي
نحن نحترم خصوصيتك، لذلك لا نشارك معلوماتك أبداً.