Elevator Control Board GECBII-LV GBA21305WA30 for Otis

الوصف

معلومات عن المنتج

النماذج ذات الصلة والبديلة

The boards of this GECBII-LV assembly and the other boards of the same Otis GECB family:

Board included in this assembly:

• GAA26800RF3 — the GECB2_LV control board included in this GECBII-LV PCB
• GAA26800RF1 — the earlier version of the GECB2_LV board
• ABA26800AVP6 — the computing core of the GECB2_LV board
• GCA26800PM1 — the LVPB power board of the GECB2_LV board

Other version of this PCB assembly:

• GAA21305WA10 / GBA21305WA10 — GECBII-LV PCB including GAA26800RF1

Board assembly sets of the same GECB2_LV board:

• GAA29502D1 / GAA29502D3 / GAA29502D30
• GBA29502C10 / GAA29502D10

Other GECB control boards:

• GECB-EN — KAA26800ABB3
• GECB-AP — DCA26800AY5
• GECB-ASIA — KAA26800ABB6 / DAA26800DV6
• GAA26800MD3 / GCA26800MD3 — GECB-II board with computing core
• GGA26800LJ60 — GECB board
• GBA26800LC1 / GBA26800LC2 / GBA26800LC3 — GECB main boards
• GBA21305XQ20 — GECB-LV board including GCA26800NR2

These are the boards of the same Otis GECBII-LV assembly and the other boards of the same Otis GECB family. They are different boards and different versions and are not interchangeable with each other, so the board number, the version and the board on which it is mounted must be confirmed before ordering.

Potensi supplies the Otis elevator control board GECBII-LV GBA21305WA30, the Otis elevator PCB board, the Otis elevator printed circuit board, the Otis elevator circuit board, the Otis GECB2-LV board and a wide range of other Otis control boards. The models above are only a part of what we can supply. We stock and source a much wider range of related and alternative models. If your model number is not listed here, please send us the model number or a photo of the original part, and we will confirm availability and the correct match for you.

لماذا تختار بوتنسي؟

• تغطية سوق 99%: يمكننا توفير ما يقارب 99% من قطع غيار المصاعد المتوفرة في السوق.
• ضمان الجودة الأصلي: نحن نوفر قطع غيار مصاعد أصلية وموثوقة.
• الدعم في تحديد الهوية من قبل الخبراء: أرسل إلينا رقم الطراز أو صور المنتج، وسنساعدك في تحديد القطعة المناسبة.
• الشحن الدولي: نحن نقدم خدمة توصيل دولية سريعة وموثوقة لمشاريع صيانة المصاعد.

الأسئلة الشائعة

Q1: What is the GBA21305WA30 board used for?

ج: It is the main control board of the Otis GCS control system. It is supplied as the GECBII-LV PCB, and it includes the board GAA26800RF3. It is the mother board that carries the computing core of the controller, and it is mounted on the application I/O boards of the control cabinet. It is also known as the Otis GECB board, the Otis GECB2-LV board and the Otis main board.

Q2: What other names and part numbers is this board known by?

ج: The board is written GBA21305WA30 and is also written GAA21305WA30, GAA21305WA3 and GBA21305WA3. It is also known as the GECBII-LV PCB, the GECB-II-LV and the GECB2-LV board. GECB stands for Global Elevator Control Board, which is the computing core of the Otis GCS control system. It is also known as the Otis elevator control board, the Otis elevator printed circuit board, the Otis elevator circuit board and the Otis control board.

Q3: What is included with this GECBII-LV PCB?

ج: The GECBII-LV PCB is supplied including the board GAA26800RF3, which is the GECB2_LV control board. The computing core ABA26800AVP6 and the LVPB power board GCA26800PM1 are separate parts of the same control system. Please confirm which parts of the set your controller needs before ordering.

Q4: What is the difference between GAA26800RF3 and GAA26800RF1?

ج: GAA26800RF3 and GAA26800RF1 are two versions of the GECB2_LV control board. GAA26800RF3 is the version included in the GECBII-LV PCB GBA21305WA30, and GAA26800RF1 is the version included in the earlier GECBII-LV PCB GAA21305WA10. The two are different versions of the same board, so the version used in your controller must be confirmed before ordering.

Q5: When the GECB board is replaced, what happens to the parameters?

ج: On the Otis GCS control system the parameters are stored on the EEPROM U8 on the GECB board. Otis documentation notes that when a GECB board is swapped, the EEPROM U8 should be moved from the existing board, otherwise the parameters are lost. Please arrange this with your installer before the board is replaced.

Q6: Which Otis elevators is this board used on, and do you supply other Otis boards?

ج: It is supplied for Otis elevator control systems that use the GECB-II / GCS control system, including Gen2 applications. Please confirm the controller type, the board position, the version and the board on which it is mounted before ordering. We also supply other Otis control boards, GECB boards, GECB2-LV boards, power boards, computing cores and other Otis elevator PCB boards and spare parts.