Elevator Slot Type Switch MKF71ASAKX 6557025010 for TKE

Descrição

Informações sobre o produto

Modelos relacionados e alternativos

Same 70 × 60 × 70 mm SECATEC design:

• MKF71ASAK — base type with 1 m cable
• MKF71AUAK — changeover contact version

Same slot type family in the smaller 60 × 30 × 45 mm case:

• MKF30ASAK — normally open contact version
• MKF30AUAK — changeover contact version
• IKF30NBDK — inductive version, PNP output
• IKF30NDDK — inductive version, NPN output

Potensi supplies the TKE MKF71ASAKX 6557025010 slot type switch, the SECATEC MKF71 slot switch and other TKE elevator switches and sensors. The models above are only a part of what we can supply. We stock and source a much wider range of related and alternative models. If your model number is not listed here, please send us the model number or a photo of the original part, and we will confirm availability and the correct match for you.

Porquê escolher a Potensi?

• Cobertura de mercado do 99%: Podemos fornecer cerca de 99% de peças sobressalentes para elevadores disponíveis no mercado.
• Garantia de Qualidade Autêntica: Fornecemos componentes para elevadores originais e fiáveis.
• Apoio à identificação por peritos: Envie-nos o número do modelo ou fotografias do produto e poderemos ajudá-lo a identificar a peça correta.
• Envio internacional: Oferecemos um serviço de entrega internacional rápido e fiável para projetos de manutenção de elevadores.

Perguntas frequentes

Q1: What is the MKF71ASAKX switch used for?

R: It is a slot type switch used at the door zone and the leveling position of the lift. A steel vane mounted in the shaft passes through the slot of the switch and operates it. The signal is used by the controller for door zone and leveling detection.

Q2: Is it a magnetic switch? What operates it?

R: It is a reed switch, and it is sold as a magnetic switch, but it is not operated by a magnet. A ferromagnetic steel vane, for example S235, is passed through the slot to operate it. This is why a magnet held near the switch may not trigger it, and why it can be mounted directly on metal.

Q3: What are the electrical ratings of this switch?

R: The SECATEC data sheet gives a normally open contact, 40 W/VA switching capacity, 230 V AC/DC and 1000 mA maximum. Switch-on time is 4.0 ms and switch-off time is 0.15 ms, with IP67 protection. The TKE manual quotes 250 V and 150 µs for the same part.

Q4: What does the X at the end of MKF71ASAKX mean?

R: MKF71ASAK is the base SECATEC type, and the X marks the customer-specific version supplied under the TKE number. The versions differ mainly in cable length and connector. Please compare your old switch with the drawing before ordering.

Q5: Which cable length do I need?

R: Several cable lengths are in the market for this switch, including 3.4 m and 4.8 m. The standard SECATEC version comes with a 1 m cable, and longer cables are made to order. Please measure the cable on your old switch, or tell us the panel position, so we can supply the right length.

Q6: Do you supply other TKE and SECATEC switches?

R: Yes, we supply the MKF71 and MKF30 slot type switches, including the changeover and inductive versions. Please send us the model number or a photo of the part you need, and our team will confirm availability and the correct match.