説明
製品情報
関連モデルおよび代替モデル
Other versions of the same switch, and the KSS key switches around it.
Same switch, other versions:
- KM804250G01 — FRD KSL version
- KM804250G02 — FRD version
- KM804250G12 — FRD RU, EU version
Other KSS key switches:
- KM51559175V018 — PH key switch FRD RU, KSS700 COP
- KM51550809V011 — micro key switch FRD, COP
- KM804352G11 — micro KABA switch, fireman car
Potensi supplies the Kone elevator key switch KM804250G11 and the wider Kone key switch range for KSS signalization. The models above are only a part of what we can supply. We stock and source a much wider range of related and alternative models. If your model number is not listed here, please send us the model number or a photo of the original part, and we will confirm availability and the correct match for you.
ポテンシを選ぶ理由
- 99% の市場カバレッジ: 弊社では、市場で入手可能なエレベーター用スペアパーツを約99%分供給可能です。.
- 確かな品質保証: 当社は、純正で信頼性の高いエレベーター用部品を提供しています。.
- 専門家による身元確認の支援: 型番または製品の写真をお送りいただければ、適切な部品をご案内いたします。.
- 国際配送: 当社は、エレベーターの保守プロジェクトにおいて、迅速かつ確実な国際配送をサポートしています。.
よくある質問
Q1: What is this switch for?
A: It is the key-operated input for the FRD function, the fire-service mode of a Kone KSS installation. Kone’s own parts descriptions name FRD as the fire brigade function: the Hungarian entry reads key switch, half cylinder, fire brigade, and the Russian entry for the same switch reads fire switch. Exactly how the lift behaves when the key is turned is set in the controller, so the switch is replaced as a part, not as a behaviour change.
Q2: How do I choose between G01, G02, G11 and G12?
A: All four are the same style of profile half-cylinder switch with two positions, and they differ in the function and version marking. G11 carries FRD RU, G12 carries FRD RU,EU and is the EU version, G02 carries FRD alone, and G01 carries FRD KSL. Read the marking on the old switch body and match it, because a different letter can mean a different function rather than a newer build.
Q3: What does two positions with the key removable in position 2 mean?
A: The key turns to two positions, and it can only be pulled out in position 2. In the other position the key stays captive, so the switch cannot be left in that state with the key gone. That is the mechanical logic of the part, and it is the detail most often missed when a customer compares it with a two-position switch from another maker.
Q4: The front is blank. Is that correct?
A: Yes. Kone lists this article with the language field blank, so the front carries no engraved text. The wording a site needs, such as fire service or a local language plate, is added on site or carried by the key ring. Kone lists a separate key ring with the FRD text in English and Russian if the marked ring is what has worn out.
Q5: Which lifts take it?
A: Kone lists it for 3000S MonoSpace, MiniSpace, MonoSpace and MonoSpace Special, and also under the ReVive modernization signalization range. The G12 version covers a different spread of families, which is one more reason to match the marking rather than the shape. If your lift is outside that list, send the controller type and we will check it.
Q6:注文する前に何を送ればよいですか?
A: A photo of the old switch, front and side, with the KM number and any version letter readable. The panel it sits in, and whether the site also needs a key ring or an extra key. The quantity, since these are usually replaced one at a time on a single lift.

