AGA26800ANY1 is the ANSI input/output board of the Otis GCS controller box, listed in Otis’ own spare parts leaflet as the PC Board, ANSI Input Output Board (w/CDBP & LDBP). The field signals of the controller pass through it, so a failed board shows as missing inputs or dead outputs, not as a blank screen. Otis lists the same board without those connections as AGA26800ANY2. Match the old board, not the lift model, before ordering.
卸売業者であろうと、メンテナンス会社であろうと、POTENSIが必要なすべての部品のためのONE-STOP-SHOPであることがお分かりいただけるでしょう。
POTENSIでは、私たちの焦点は、中国のエレベーター業界で21年の経験を持つ、簡単にすべてのブランドのエレベーターやクライアントのすべての種類へのアクセスを支援することです。
POTENSIの使命は、最高品質のエレベーター部品と卓越したサービスにより、お客様の成功を支援し、世界中の建物の安全性を高めることです。
納品スピードはポテンシの強みですが、他社との違いはマルチブランドの提供です。POTENSIからの購入は、200K以上のマルチブランドパーツでとても簡単です。
ウェブショップは24時間年中無休で営業しております。一度 登録済み 会員になると、様々な特典が受けられ、必要なパーツをコードで検索でき、セールススペシャリストによるVIPサービスを受けることができます。
高品質を保証するために、POTENSIは、元の機器メーカーまたはその直接サプライヤーによってのみ部品を提供します。POTENSIと協力することで、顧客と対峙する際に成功の保険を得ることができます。
Other GCS I/O board versions, and the boards beside it in the same controller box.
GCS I/O board versions:
Other boards in the GCS controller box:
Potensi supplies the Otis elevator PCB board AGA26800ANY1, the Otis GCS I/O board and the Otis controller board range. The models above are only a part of what we can supply. We stock and source a much wider range of related and alternative models. If your model number is not listed here, please send us the model number or a photo of the original part, and we will confirm availability and the correct match for you.
Q1: What does the AGA26800ANY1 board do?
A: It is the input/output board of the GCS controller box, the board where the controller’s field signals are terminated. Inputs such as switches and safety contacts, and the outputs that drive contactors and relays, are wired into it. It does not run the lift logic, so a fault here shows as missing signals rather than as a controller that will not boot.
Q2: What is the difference between ANY1 and ANY2?
A: Otis describes ANY1 as the version with CDBP and LDBP, and ANY2 as the version without them. They are two separate part numbers in the same leaflet row, not one board under two names. Read the number on your old board and order that one.
Q3: Is ADA26800ANY1 the same board?
A: Otis lists ADA26800ANY1 and AGA26800ANY1 together as alternate codes for the same I/O board description. That means either code can appear on a board fitted to the same controller box. Send a photo of the label and we will confirm which one you are holding.
Q4: Which Otis controllers use it?
A: It belongs to the GCS and GCS II controller box, in the ANSI version used on NSAA equipment. Otis lists it under the ABA21305BN controller type in its spare parts leaflet. It is not a Gen2 car station board, so do not order it by lift model alone.
Q5: Do I have to keep anything from the old board?
A: On the I/O board itself there is nothing to carry over. The EEPROM warning in Otis’ leaflet applies to the micro processor board AEA26800AML11: its socketed U8 must be moved to the new board or the parameters are lost. Keep the old board until the replacement is confirmed in place.
Q6: What should I send before ordering?
A: A photo of the old board, front and back, with the part number and any revision marking readable. A photo of the terminal layout, since the connectors are grouped differently between versions. The controller type from the cabinet label, and the quantity you need.
初回注文時に10%を割引。
プロモーション商品の最新情報をお届けします。
年中無休のセールススペシャリストによるVIPサービスをご利用ください。
クレジット決済をご利用いただけます。
