Elevator Car Panel Extension Board EXT2 5124532 for Orona

The EXT2 board, part 5124532, is the car panel extension board of the Orona ARCA 3 control system. It collects the car button presses and car call registration from the operating panel, passes them to the main controller over the cabin bus, and carries the special car functions of that panel. It is a plug-in board, not the main CPU. When a car stops answering calls, Orona’s ARCA 3 guide checks this board and its software first.

シェアする
  1. POTENSIのビジネスタイプはB2CではなくB2Bですので、エンドユーザーの方はお近くの代理店から購入されることをお勧めします。私たちのビジネスは、地元の卸売業者/代理店のみを対象としています。
  2. 地元の大手エレベーター・メンテナンス会社で、自社の技術者がいる場合は、まず当社のサービス部門に連絡してみてください。
  3. なぜなら、ポテンシは常に製品とサービスを第一に考えているからです。
  4. 長期的かつ信頼性の高い、プロフェッショナルなエレベーター製品のサプライヤーをお探しですか? 登録 にご登録ください。素晴らしいサポートと特典を受けることができます。
  1. 品質保険
    100% 新品で、元のメーカーまたはその直接のサプライヤーからのもの。
  2. マルチブランド部品
    どのエレベータブランドにも対応できるスペアパーツが20万点以上用意されている。
  3. スピードと柔軟性
    フィードバックの3時間以内に、10kのプロダクトのための4日のパッケージの時間、5日はすべてを出荷する。
  4. アフターセールス保険と安全性
    12ヶ月の保証があり、間違った商品を送った場合は無料で返品できます。
  5. 送料を最大限節約
    ONE-STOP-SHOPは、すべてのパーツを1つのソースから購入することで、時間と送料を節約します。

卸売業者であろうと、メンテナンス会社であろうと、POTENSIが必要なすべての部品のためのONE-STOP-SHOPであることがお分かりいただけるでしょう。

POTENSIでは、私たちの焦点は、中国のエレベーター業界で21年の経験を持つ、簡単にすべてのブランドのエレベーターやクライアントのすべての種類へのアクセスを支援することです。

POTENSIの使命は、最高品質のエレベーター部品と卓越したサービスにより、お客様の成功を支援し、世界中の建物の安全性を高めることです。

納品スピードはポテンシの強みですが、他社との違いはマルチブランドの提供です。POTENSIからの購入は、200K以上のマルチブランドパーツでとても簡単です。

ウェブショップは24時間年中無休で営業しております。一度 登録済み 会員になると、様々な特典が受けられ、必要なパーツをコードで検索でき、セールススペシャリストによるVIPサービスを受けることができます。

高品質を保証するために、POTENSIは、元の機器メーカーまたはその直接サプライヤーによってのみ部品を提供します。POTENSIと協力することで、顧客と対峙する際に成功の保険を得ることができます。

説明

製品情報

特集 仕様
型番 5124532
別表記 EXT2, EXT 2, extension board 2, 5124532-1, car panel extension board
ブランド オロナ
製品タイプ Car panel extension board (COP extension PCB board)
機能 Reads the car buttons and car call registration and sends them to the main controller over the cabin bus
使用先 Orona ARCA 3 control cabinets; distributors also list it for ARCA 1 and ARCA 2
互換性 Cabinet generation and the software version on the board must match

関連モデルおよび代替モデル

Orona EXT2 works with the other extension boards and the base board in the same cabinet.

Extension boards:

  • 5124530 EXT1 — landing calls, arrows, position
  • 5124533 EXT3 — car top, door operator
  • 5124534 EXT4 — inspection, positioning signals
  • 5124535 EXT5 — isolated I/O, fire service
  • 5124332 EXT2 — the ARCA II generation number

Base board:

  • 5124501 PBCM — ARCA 3 cabinet base board

Potensi supplies the Orona elevator extension board EXT2 5124532, the Orona ARCA 3 PCB board and the other circuit boards of this cabinet. The models above are only a part of what we can supply. We stock and source a much wider range of related and alternative models. If your model number is not listed here, please send us the model number or a photo of the original part, and we will confirm availability and the correct match for you.


ポテンシを選ぶ理由

  • 99% の市場カバレッジ: 弊社では、市場で入手可能なエレベーター用スペアパーツを約99%分供給可能です。.
  • 確かな品質保証: 当社は、純正で信頼性の高いエレベーター用部品を提供しています。.
  • 専門家による身元確認の支援: 型番または製品の写真をお送りいただければ、適切な部品をご案内いたします。.
  • 国際配送: 当社は、エレベーターの保守プロジェクトにおいて、迅速かつ確実な国際配送をサポートしています。.

よくある質問

Q1: What does the EXT2 board actually do?

A: It is the extension board for the car operating panel, and Orona’s own board list describes it as the car panel extension for calls and special car functions. It reads the button presses on the panel, registers the car calls and passes them to the main controller over the cabin bus. It also carries the extra cabin functions grouped on that panel, which is why a fault here shows up as buttons that stop responding rather than as a dead lift.

Q2: Is 5124532 the main controller board?

A: No, it is an extension board. The base board of the ARCA 3 cabinet is the PBCM, part 5124501, and the main control and memorised parameters sit with the CPU side of the system. This board only extends the car panel I/O and reports over the bus, so replacing it will not restore a lost configuration.

Q3: The car ignores the inside buttons, then works again after a power cycle. Is that this board?

A: That is the exact symptom Orona documents for this board, and their procedure is specific. Enter the Cabin Extensions/Variables menu and read the software version of EXT2: if it is lower than h32, the board has to be replaced, and that version has been issued since about August 2016. If the board already carries h32 or later, keep the board and load the newer manoeuvre version instead.

Q4: Does 5124532 replace 5124332, or fit ARCA 1 and ARCA 2 as well?

A: 5124332 is the EXT2 number of the ARCA II generation, and 5124532 is the current number used in the ARCA III lists. Several distributors list 5124532 across ARCA 1, 2 and 3, which suggests the current board covers the older cabinets, but Orona’s own parts list ties it to ARCA 3. Cabinets differ in wiring and in board software, so confirm the cabinet generation and the marking on the old board before you order.

Q5: Which number should I quote?

A: 5124532 is the Orona part number, and it is also written as 5124532-1, EXT2 and EXT 2. The number 9944022 that appears on some websites is a distributor’s own catalogue code and not an Orona number, so do not order by it. Send us the marking printed on your old board as well, because the same cabinet can carry a different extension board revision.

Q6: What do you need from me before dispatch?

A: Please tell us the ARCA generation of the cabinet, the marking on the board you are replacing, and the software version if the lift still runs far enough to read it. A photo of the old board, front and connectors, is the fastest way to confirm the match. We supply the board on its own; panel plates, buttons and the connecting cables are separate items.

ポテンシロゴ
お客様のプライバシーを尊重し、お客様の情報を共有することはありません。