The Potensi 510 escalator cleaning machine brushes, sprays and vacuums the steps in one pass. Two spiral brushes work the treads, water is sprayed onto them and the dirty water is pulled back into the machine, so the steps are left clean and nearly dry. A 32 L tank feeds the spray, and a hand wand with its own valve cleans risers and step edges. Three switches on the handle run the light, suction and spray.
卸売業者であろうと、メンテナンス会社であろうと、POTENSIが必要なすべての部品のためのONE-STOP-SHOPであることがお分かりいただけるでしょう。
POTENSIでは、私たちの焦点は、中国のエレベーター業界で21年の経験を持つ、簡単にすべてのブランドのエレベーターやクライアントのすべての種類へのアクセスを支援することです。
POTENSIの使命は、最高品質のエレベーター部品と卓越したサービスにより、お客様の成功を支援し、世界中の建物の安全性を高めることです。
納品スピードはポテンシの強みですが、他社との違いはマルチブランドの提供です。POTENSIからの購入は、200K以上のマルチブランドパーツでとても簡単です。
ウェブショップは24時間年中無休で営業しております。一度 登録済み 会員になると、様々な特典が受けられ、必要なパーツをコードで検索でき、セールススペシャリストによるVIPサービスを受けることができます。
高品質を保証するために、POTENSIは、元の機器メーカーまたはその直接サプライヤーによってのみ部品を提供します。POTENSIと協力することで、顧客と対峙する際に成功の保険を得ることができます。
Potensi also supplies the brushes, hoses and wands that keep this escalator cleaner running, and we can quote them as a set together with the machine.
Spare parts for the 510:
Potensi supplies the escalator cleaning machine 510, the escalator step cleaning machine and its brushes, wands and hoses. The models above are only a part of what we can supply. We stock and source a much wider range of related and alternative models. If your model number is not listed here, please send us the model number or a photo of the original part, and we will confirm availability and the correct match for you.
Q1: What exactly does the 510 clean?
A: It cleans the step treads of an escalator or moving walk with two rotating spiral brushes. The hand wand that comes with it is used on the risers, the step edges and the corners the brush head cannot reach. It is a step and riser cleaner, not a handrail or balustrade polisher.
Q2: How is the machine used on site?
A: Place it on the steps at the top of the escalator with the brush head on the treads, then set the pressure gauge into the green band. Switch on the light, the suction and the spray, and let the running escalator carry the machine down while the head cleans the steps. One full loop cleans the run; make the last loop with the spray switched off so the suction picks up the remaining water.
Q3: How long does the 32 L tank last?
A: The clean water tank holds 32 litres, and consumption depends on how dirty the steps are, how wide the escalator is and how much water the wand uses. In practice the operator refills between runs rather than mid-run, and the tank is filled from a bucket or a tap on the landing. Tell us your escalator rise and step width and we will advise how to plan the loop.
Q4: What is the pressure gauge for?
A: The gauge is marked with light, good and heavy bands, and the needle must stay in the green band while the brushes are down. On the machine in our video the needle sits at about 2, which is the normal working point. A reading in the red band means the head is pressed too hard against the steps, which overloads the brushes and strains the machine.
Q5: Do the steps stay wet after cleaning?
A: The dirty water is drawn back into the machine through the head as it cleans, and a sight tube on the body shows the water being recovered. The final loop is done with the spray off so the suction can dry the treads. If the treads are still wet, the suction is not working: check the recovery tank level and the hose couplings first.
Q6: What is included, and what do you need from me?
A: The machine is supplied with the brush pair, the hand extraction wand and the hose set, on a pallet for shipping. Please tell us your site voltage and plug type, and the step width of your escalators, so we confirm the correct version before dispatch. We also stock the brushes, wands, hoses and valves as spare parts.
初回注文時に10%を割引。
プロモーション商品の最新情報をお届けします。
年中無休のセールススペシャリストによるVIPサービスをご利用ください。
クレジット決済をご利用いただけます。
