The KCN-710A is the DC power supply and fuse board of the Mitsubishi elevator control cabinet. It converts the transformer output into the DC supplies used in the cabinet. The board is fitted in GPS-3 (GPS-III) control cabinets and in some later cabinets. It is also listed as a Mitsubishi control cabinet power board or fuse board. It comes under several P203722B000G part numbers, so please confirm the label before ordering.
卸売業者であろうと、メンテナンス会社であろうと、POTENSIが必要なすべての部品のためのONE-STOP-SHOPであることがお分かりいただけるでしょう。
POTENSIでは、私たちの焦点は、中国のエレベーター業界で21年の経験を持つ、簡単にすべてのブランドのエレベーターやクライアントのすべての種類へのアクセスを支援することです。
POTENSIの使命は、最高品質のエレベーター部品と卓越したサービスにより、お客様の成功を支援し、世界中の建物の安全性を高めることです。
納品スピードはポテンシの強みですが、他社との違いはマルチブランドの提供です。POTENSIからの購入は、200K以上のマルチブランドパーツでとても簡単です。
ウェブショップは24時間年中無休で営業しております。一度 登録済み 会員になると、様々な特典が受けられ、必要なパーツをコードで検索でき、セールススペシャリストによるVIPサービスを受けることができます。
高品質を保証するために、POTENSIは、元の機器メーカーまたはその直接サプライヤーによってのみ部品を提供します。POTENSIと協力することで、顧客と対峙する際に成功の保険を得ることができます。
Other Mitsubishi control cabinet power boards:
Other Mitsubishi GPS-3 boards:
Potensi supplies the Mitsubishi elevator power supply board KCN-710A, the Mitsubishi control cabinet fuse board and other Mitsubishi elevator spare parts. The models above are only a part of what we can supply. We stock and source a much wider range of related and alternative models. If your model number is not listed here, please send us the model number or a photo of the original part, and we will confirm availability and the correct match for you.
Q1: What does the KCN-710A do in the control cabinet?
A: It is the DC power supply board of the cabinet, and it also carries the fuses for the cabinet supplies. It takes the transformer output and produces the DC voltages the cabinet needs. Mitsubishi’s GPS-3 training material describes it as the DC power supply board that also feeds the main capacitor charging circuit.
Q2: Why are there several part numbers for the same board?
A: The board is listed as P203722B000G01, P203750B000G01, P203722B000G03 and P203722B000G05. The suffix marks a version, so they are not automatically interchangeable. Please read the number printed on your old board rather than the listing title.
Q3: Which Mitsubishi systems use this board?
A: It belongs to the GPS-3 (GPS-III) generation, and suppliers also list it for later cabinets such as LEHY-II and HOPE-2. Please tell us your controller type and cabinet photo, and we will confirm the correct version. Controllers of other generations use different cabinet power boards.
Q4: I replaced the board and the fuse blew again. Why?
A: A fuse does not blow on its own, so check the cabinet before fitting another board. Look for a short circuit, damaged wiring, a loose terminal or an unstable power input. If the fault is outside the board, a new board will burn in the same way, so a full cabinet check comes first.
Q5: Are there different quality levels of this board in the market?
A: Yes, this board is offered both as genuine and as a copy, and the two can look almost the same from outside. The differences show in the components and in service life, and copies are more likely to burn fuses under unsuitable operation. Please state the grade you need when you ask for a quote.
Q6: How can I confirm this is the right board for my lift?
A: Send us a photo of the old board label, the fuse positions and the cabinet connectors. The part number, the fuse layout and the plug positions together identify the version. If the label is unreadable, the cabinet type and the lift model are usually enough for us to confirm it.
初回注文時に10%を割引。
プロモーション商品の最新情報をお届けします。
年中無休のセールススペシャリストによるVIPサービスをご利用ください。
クレジット決済をご利用いただけます。
