AGA26800ANY1 is the ANSI input/output board of the Otis GCS controller box, listed in Otis’ own spare parts leaflet as the PC Board, ANSI Input Output Board (w/CDBP & LDBP). The field signals of the controller pass through it, so a failed board shows as missing inputs or dead outputs, not as a blank screen. Otis lists the same board without those connections as AGA26800ANY2. Match the old board, not the lift model, before ordering.
Whether you are a wholesaler or even maintenance company, you will find POTENSI is the ONE-STOP-SHOP for all the parts you need.
At POTENSI, our focus is to help you access to all kind of clients or all brand elevator easily with our 21 years experience in China elevator industry.
POTENSI mission is to help you to succeed and enhance building safety worldwide with top-quality elevator parts and outstanding service.
Delivery speed is our strength, but what make us different from everyone else is our multi-brand offering. Purchasing from POTENSI is as easy as it gets with 200K+ multi-brand parts.
Our web shop is open 24hours, 7days a week. Once you registered as our member, you will get many great benefits and you are able to find the part you need with any code and get our VIP service by sales specialist.
To ensure high quality, POTENSI provide parts only by original equipment manufacturers or their direct suppliers. You cooperate with POTENSI , you get the insurance of succeed when you are facing your customers.
Other GCS I/O board versions, and the boards beside it in the same controller box.
GCS I/O board versions:
Other boards in the GCS controller box:
Potensi supplies the Otis elevator PCB board AGA26800ANY1, the Otis GCS I/O board and the Otis controller board range. The models above are only a part of what we can supply. We stock and source a much wider range of related and alternative models. If your model number is not listed here, please send us the model number or a photo of the original part, and we will confirm availability and the correct match for you.
Q1: What does the AGA26800ANY1 board do?
A: It is the input/output board of the GCS controller box, the board where the controller’s field signals are terminated. Inputs such as switches and safety contacts, and the outputs that drive contactors and relays, are wired into it. It does not run the lift logic, so a fault here shows as missing signals rather than as a controller that will not boot.
Q2: What is the difference between ANY1 and ANY2?
A: Otis describes ANY1 as the version with CDBP and LDBP, and ANY2 as the version without them. They are two separate part numbers in the same leaflet row, not one board under two names. Read the number on your old board and order that one.
Q3: Is ADA26800ANY1 the same board?
A: Otis lists ADA26800ANY1 and AGA26800ANY1 together as alternate codes for the same I/O board description. That means either code can appear on a board fitted to the same controller box. Send a photo of the label and we will confirm which one you are holding.
Q4: Which Otis controllers use it?
A: It belongs to the GCS and GCS II controller box, in the ANSI version used on NSAA equipment. Otis lists it under the ABA21305BN controller type in its spare parts leaflet. It is not a Gen2 car station board, so do not order it by lift model alone.
Q5: Do I have to keep anything from the old board?
A: On the I/O board itself there is nothing to carry over. The EEPROM warning in Otis’ leaflet applies to the micro processor board AEA26800AML11: its socketed U8 must be moved to the new board or the parameters are lost. Keep the old board until the replacement is confirmed in place.
Q6: What should I send before ordering?
A: A photo of the old board, front and back, with the part number and any revision marking readable. A photo of the terminal layout, since the connectors are grouped differently between versions. The controller type from the cabinet label, and the quantity you need.
① Get 10% off on your first order.
② Get latest news about our promotion products.
③ Get our sales specialist VIP service 24/7.
④ Get access to our credit payment time.
