Description
Product Information
Related & Alternative Models
The other car audio boards, and the controller boards it works with.
Car audio and gong boards:
- 5124338 — GONG CAN, landing gong board
- 5124342 — TS2005, voice and telephone board
- 5124345 — TS2005, Portuguese version
- 5124357 — PAT, for non-Orona telealarms
ARCA 2 controller boards:
Potensi supplies the Orona elevator gong board PCGONG 5124400, the Orona ARCA II PCB board and the car audio boards around it. The models above are only a part of what we can supply. We stock and source a much wider range of related and alternative models. If your model number is not listed here, please send us the model number or a photo of the original part, and we will confirm availability and the correct match for you.
Why Choose Potensi?
- 99% Market Coverage: We can supply nearly 99% of elevator spare parts on the market.
- Genuine Quality Assurance: We provide genuine and reliable elevator components.
- Expert Identification Support: Send us the model number or product photos, and we can help confirm the correct part.
- Global Shipping: We support fast and reliable international delivery for elevator maintenance projects.
FAQ
Q1: What does the PCGONG board do?
A: It handles the audio that reaches the passenger in the car: the intercom link and the arrival gong. The intercom audio leaves the car through this board, and the gong is triggered from the controller and sounded through it. It sits on the car side, so the fault appears as a silent gong or a dead intercom rather than as a lift that will not run.
Q2: Is it the same as the gong board 5124338?
A: No, they are two different boards and they are not interchangeable. 5124338 is the GONG CAN board, which Orona’s ARCA II board list describes as a CPU expansion for landing gongs and horizontal communications, so it serves the landings and the group. 5124400 works on the car audio side, and the two numbers are often confused because both are sold as gong boards.
Q3: The gong has gone silent. Is the board at fault?
A: Check the setting before the board. The ARCA II service tool has a car gong screen where the gong type and volume are set, and a value set to off silences it. Then check the speaker and its wiring, and only after that suspect the board. If the intercom is also dead, the board or its supply becomes the likely cause, because both functions pass through it.
Q4: Does a replacement board need setting up?
A: The gong melody and volume are controller settings, not board settings, so they normally come back with the parameters already in the controller. Still, verify the car gong screen and the intercom test in the service tool after the swap, before you hand the lift back. If the gong behaves differently from before, the setting is the first place to look.
Q5: Which Orona lifts take this board?
A: It belongs to the ARCA II generation, the family where the board numbers run in the 51244xx range, alongside the CPU M34 at 5124409. The ARCA 3 controllers use the 51245xx range and take different boards. If your controller is an ARCA 3, do not order this one: send us the number on the old board and we will match it.
Q6: What should I send before ordering?
A: A photo of the old board, front and back, with the number and the connector layout visible. Tell us whether the landing gongs still work and whether the intercom is also dead, because that separates this board from the GONG CAN board. With that we confirm the number and the version before dispatch.

