The Mikronik SX-PLUS lift controller board is the main controller board of the Mikronik SX-PLUS lift control system, and it is used on rope and hydraulic lifts. This Mikronik lift controller PCB carries the LCD and the 7-segment display, the menu buttons, the relay outputs and the encoder inputs. It is also known as the Mikronik lift controller board, the Mikronik SX Plus control card and the Mikronik lift control PCB.
Whether you are a wholesaler or even maintenance company, you will find POTENSI is the ONE-STOP-SHOP for all the parts you need.
At POTENSI, our focus is to help you access to all kind of clients or all brand elevator easily with our 21 years experience in China elevator industry.
POTENSI mission is to help you to succeed and enhance building safety worldwide with top-quality elevator parts and outstanding service.
Delivery speed is our strength, but what make us different from everyone else is our multi-brand offering. Purchasing from POTENSI is as easy as it gets with 200K+ multi-brand parts.
Our web shop is open 24hours, 7days a week. Once you registered as our member, you will get many great benefits and you are able to find the part you need with any code and get our VIP service by sales specialist.
To ensure high quality, POTENSI provide parts only by original equipment manufacturers or their direct suppliers. You cooperate with POTENSI , you get the insurance of succeed when you are facing your customers.
Other Mikronik lift controller systems:
Other Mikronik cards and devices:
Potensi supplies the Mikronik SX-PLUS lift controller board, the Mikronik lift controller PCB and other Mikronik lift controller cards. The models above are only a part of what we can supply. We stock and source a much wider range of related and alternative models. If your model number is not listed here, please send us the model number or a photo of the original part, and we will confirm availability and the correct match for you.
Q1: What is the Mikronik SX-PLUS lift controller board used for?
A: It is the main controller board of the Mikronik SX-PLUS lift controller, and it is fitted inside the lift control panel. It carries the LCD and the 7-segment display, the four menu buttons, the relay outputs and the encoder terminals, so the technician can read the position, set the parameters and trace the faults on the board itself. It is also known as the Mikronik lift controller board, the Mikronik SX Plus main board and the Mikronik lift control PCB.
Q2: What other names is this board known by?
A: The board is marked mikronik SX-PLUS LIFT CONTROLLER, and it is also written SX PLUS and Mikronik SX-PLUS. The board and the lift controller are made by Mik-el Elektronik of Istanbul, and the boards carry the mik-el mark as well. The same product family is also called the Mikronik lift controller, the Mikronik lift control card and the Mikronik control panel board.
Q3: Which lifts is it used on, and what are the main specifications?
A: It is used on rope and hydraulic lifts that run the Mikronik SX-PLUS control system. The system operates up to 24 stops in all types of control, and it works up to 1,60 m/s with a VVVF speed control device. Communication with the LOPs and the COPs is over a CAN Bus, with automatic addressing of the LOPs, and the floor position, the stopping distance and the level correction zone can be set with only one magnetic switch. It conforms to EN81-1, EN81-2 and A3.
Q4: How do I check the version of the board?
A: The board carries a version marking and a date code on its label, for example SXPV2.10.9-22.11 with the date code 2018-9. Different versions of the same board are not interchangeable in every installation. Please compare the version marking and the date code on your original board before ordering, and send us a photo of the label if you are not sure.
Q5: What are the connections on the board?
A: The board carries the 220V supply terminals, the K0 to K9 terminals, the M, N, T, U, A and B terminals, the 1, 2, 3 and 4 terminals, the 1001 to 1003 terminals, and the 10A, 120, 130, 140 and 10B terminals. It also carries seven relays marked K1 to K7, the +12V, -12V and +5V outputs, the SHL terminal and the encoder terminals marked A+, A-, B+, B-, C+, C-, D+ and D-. The connectors SV1, SV2, J1 and J2 are also on the board.
Q6: How can I confirm this board matches my lift, and do you supply other Mikronik parts?
A: Please compare the board layout, the terminal markings, the version marking and the connector positions with the board in your control panel. If you are not sure, please send clear photos of the front and the back of the board, and our technical team can help identify the correct board. We also supply the Mikronik SX Classic and SX Ultra controller boards, the Mikronik SX/CPU, SX/CAB, SX/TRM and SX/RLK cards, the MPA3 magnetic switch and other Mikronik lift control parts.
① Get 10% off on your first order.
② Get latest news about our promotion products.
③ Get our sales specialist VIP service 24/7.
④ Get access to our credit payment time.
