Elevator Inverter MP ecoGo SYNC 7.5 kW 400 V for MP

الوصف

معلومات عن المنتج

النماذج ذات الصلة والبديلة

MP ecoGo inverter:

• 2152INV7K5 — 7.5 kW / 10 HP, 400 V, SYNC
• MP026-0023N — UK catalogue number for the same unit

MP DSP inverters and ecoGo tools:

• MP026-0007N — DSP SYN 6P 15 HP 400 V
• MP026-0002N — DSP ASY 6P 10 HP 400 V
• MP043-0007 — integrated console for ecoGo
• MP006-0008 — connection kit, ecoGo to PC tool

Potensi supplies the MP ecoGo inverter 2152INV7K5 for synchronous gearless lifts, the MP elevator drive board and other MP elevator spare parts. The models above are only a part of what we can supply. We stock and source a much wider range of related and alternative models. If your model number is not listed here, please send us the model number or a photo of the original part, and we will confirm availability and the correct match for you.

لماذا تختار بوتنسي؟

• تغطية سوق 99%: يمكننا توفير ما يقارب 99% من قطع غيار المصاعد المتوفرة في السوق.
• ضمان الجودة الأصلي: نحن نوفر قطع غيار مصاعد أصلية وموثوقة.
• الدعم في تحديد الهوية من قبل الخبراء: أرسل إلينا رقم الطراز أو صور المنتج، وسنساعدك في تحديد القطعة المناسبة.
• الشحن الدولي: نحن نقدم خدمة توصيل دولية سريعة وموثوقة لمشاريع صيانة المصاعد.

الأسئلة الشائعة

Q1: What is the 2152INV7K5 used for?

ج: It is the drive inverter of the MP ecoGo controller and it feeds the gearless synchronous machine. It is mounted in the control cabinet and works with the ecoGo main board and the console. It is the complete inverter module, not a control board for another part of the lift.

Q2: Which numbers identify this inverter?

ج: The MP number is 2152INV7K5, and the UK catalogue number is MP026-0023N. In the ecoGo software the same unit appears as 10HP/400V AC. Suppliers also write it as MP ecoGo inverter, ecoGo SYNC 7.5 kW or MP drive board, so the label is the final reference.

Q3: How do I know whether I need SYNC or ASY?

ج: SYNC is for synchronous gearless machines, which is what the ecoGo inverter is set up for. ASY is for asynchronous machines with a geared traction unit, and it is a different unit. Please check the machine nameplate, because fitting an SYNC inverter to an asynchronous machine will not run the lift.

Q4: Is the ecoGo inverter the same as the older MP DSP inverter?

ج: No, they belong to different controller generations and are not interchangeable. The DSP range is listed separately, for example MP026-0007N for the 15 HP synchronous version and MP026-0002N for the 10 HP asynchronous version. Please confirm which controller your cabinet has before ordering.

Q5: What is needed after fitting a replacement inverter?

ج: The motor data and the lift parameters have to match your installation. This is done with the ecoGo console or with the PC tool, and the encoder wiring must be checked at the same time. A replacement inverter that is not configured will not run correctly, even when the wiring is right.

Q6: Can you supply only the internal board?

ج: MP lists this rating as a complete inverter module, and that is the form in which we normally supply it. If you need only the internal power board, please send us photos of the board and its label. We will then confirm what is available for your version rather than guess.