Elevator Door Motor F9 IP54 Separate Type for TKE

الوصف

معلومات عن المنتج

النماذج ذات الصلة والبديلة

F9 door drive versions:

• F9 integrated — motor with the F9S controller inside
• F9S — door drive controller board

Other TKE door motors:

• 125ST-13 — PM door motor for K300 / K200
• DM-75 — PM door motor for K400
• TSG400 with F9 kit — complete replacement operator

Potensi supplies the TKE elevator door motor F9 IP54 in the separate type, the TKE F9 door drive motor and other TKE elevator spare parts. The models above are only a part of what we can supply. We stock and source a much wider range of related and alternative models. If your model number is not listed here, please send us the model number or a photo of the original part, and we will confirm availability and the correct match for you.

لماذا تختار بوتنسي؟

• تغطية سوق 99%: يمكننا توفير ما يقارب 99% من قطع غيار المصاعد المتوفرة في السوق.
• ضمان الجودة الأصلي: نحن نوفر قطع غيار مصاعد أصلية وموثوقة.
• الدعم في تحديد الهوية من قبل الخبراء: أرسل إلينا رقم الطراز أو صور المنتج، وسنساعدك في تحديد القطعة المناسبة.
• الشحن الدولي: نحن نقدم خدمة توصيل دولية سريعة وموثوقة لمشاريع صيانة المصاعد.

الأسئلة الشائعة

Q1: What does “separate type” mean for the F9 door motor?

ج: In the separate type the motor is supplied on its own, and the F9S door controller is mounted apart from it. In the integrated type the controller board sits inside the motor housing, so the two parts arrive as one unit. Please check whether your old motor has a control board inside the housing before you order.

Q2: How can I tell which type I have?

ج: Open the motor cover and look for the F9S controller board inside the housing. If the board is inside, the drive is integrated; if the housing holds only the motor and the cables lead away to a separate panel, it is the separate type. Photos of the open housing and the cable entry are usually enough for us to confirm it.

Q3: What are the electrical ratings of the F9 motor?

ج: Supplier data gives 230 V 50/60 Hz, 1.8 A and 1.9 N·m with IP54 protection. The rating plate on your motor is the final reference, because versions with a different torque exist. Please send the nameplate photo if you need us to match it exactly.

Q4: Which part numbers refer to this motor?

ج: The motor is known as F9, and the drive family is also listed as F9S. Other numbers appear in catalogues, including A3811381 PPI, 782210-008 and 1251R7. These are numbering layers from different suppliers, so the model on the label should be checked before ordering.

Q5: Which TKE door operators use this motor?

ج: It is used on TKE door operators of the frequency-controlled generation. Door operators from other generations use different motors, such as the 125ST-13 permanent magnet motor. Please send the operator type and the mounting photo, and we will confirm the fit.

Q6: What should be checked when fitting a replacement?

ج: Check the door panel weight, the belt or rope tension and the pulley wear before the new motor is fitted. After fitting, the operator normally needs its door width and travel re-learned. A stiff door or an overtight belt will overload the new motor, so the mechanics come first.